GA Z77M D3H bsod errors on clean install

[jamrockz]

currently trying to install windows unto a new machine and keep getting bsod 0x101

I've tried swapping out memory sticks/ using only bare minimum of parts (using only one stick of memory and taking out gfx card) still nothing

i've reseated everything and clock from 100.0 to 100.1 and still getting the same error

COOLER MASTER HAF 912 Mid Tower Computer Case
GIGABYTE GA-Z77M-D3H REV 1.1  Motherboard
EVGA GeForce GTX 660 Ti 2GB 192-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
CORSAIR HX series HX650 650W ATX12V v2.2 / EPS12V 2.91 SLI Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply
Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo)Quad-Core Desktop Processor
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Seagate Barracuda 1TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
COOLER MASTER Hyper 212 EVOCPU Cooler



UPDATE: I've changed the c3/c6 settings to disable

The windows installation was able to get to Completing Installation Settings then it froze and after restarting and checking with system repair from the dvd it showed me

Problem Event name - StartupRepairOffline
Problem Signature 1 - 6.1.7600.16385
Problem Signature 2 - 6.1.7600.16385
Problem Signature 3 - unknown
Problem Signature 4 - 867
Problem Signature 5 - ExternalMedia
Problem Signature 6 - 1
Problem Signature 7 - FailureDuringSetup

[absic]

Hi there,

Have you tried updating to the latest BIOS for your motherboard?

If you are running the latest BIOS and the problem is still occurring, try raising the CPU Vcore voltage by the smallest amount and see if that helps.

[jamrockz]

I have updated the bios to 14d and it no longer bsods but it just freezes then resets at expanding windows files.

[jamrockz]

My computer is now up and running after disabling the auto voltage control features in the bios and i was able to install windows, gfx card and mobo drivers after thank you so much you've been a great help