Official GIGABYTE Forum

GA-880GA-UD3H Rev 2.2 USB3.0 speed issue

GA-880GA-UD3H Rev 2.2 USB3.0 speed issue
« on: April 27, 2011, 07:10:27 am »
I connected a Verbatim (store n go) USSB3.0 storage device to the mb's USSB3.0 port and the transfer rates is around 25 MB/s which is more like USB2.0 performance.  I've installed the latest drivers from Gigabyte's site, check all the BIOS settings..........

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-880GA-UD3H Rev 2.2 USB3.0 speed issue
« Reply #1 on: April 27, 2011, 09:30:06 am »
Have you made sure that USB3 is enabled in the BIOS. I am not sure if it is the same setup as the Intel platform but on there we have a problem of the shared bandwidth between the USB3 and the SATA3.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: GA-880GA-UD3H Rev 2.2 USB3.0 speed issue
« Reply #2 on: April 28, 2011, 10:05:19 pm »
USB 3.0 is enabled in BIOS.  I am copying a lot of smaller files and I'm getting a sligthly slower transfer speed as when connected to a USB2.0 port.  I've aslo logged this with Gigabyte's support site, but the response seems to be very slow...............
« Last Edit: April 28, 2011, 10:09:14 pm by debeera »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-880GA-UD3H Rev 2.2 USB3.0 speed issue
« Reply #3 on: April 29, 2011, 02:38:42 pm »
Yes I am afraid it is often not speedy and being holiday time probably worse than normal. They will get back to you though.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy