GA-880GA-UD3H memory timings for FX-8150?

[lasitter]

OK, so I know it's not on the CPU support list, but I figured that with the right memory timings, this might work.

With all the timings set to optimized / auto / default, when attempting to install Windows 7 I'm getting a MEMORY_MANAGEMENT BSOD, stop
 0x0000001A,
0000000000041287,
0000000000000038

Memory is Corsair Vengeance 8GB (4x2GB) DDR3 2000 MHz (CMZ4GX3M2A2000C10)

I'd seen someone else that had a similar error / same processor with Windows 7 64-bit saying that changing the command rate from 1T to 2T solved the problem.

There are lots of timings, which I've written down, if anyone wants to suggest the most relevant ones I'd be happy to post them from the  BIOS screen.

Thanks in advance.

[lasitter]

I've just tried MEMTEST and it craps out almost immediately. I suppose I should try this with the 1090T and see how that goes ...

[autotech]

I would download cpuz and set timings accordint to that. Also make sure ram is unganged mode and set downclock to 1600 if at all possiable.  Timings should be set to 9-9-9-25 to be safe for booting. If you can install them on a different system then use cpuz to check them with or according to memtest you might want to return that memory and get different if you can.