Official GIGABYTE Forum

POST error GA-B150M-D3H -- five beeps

POST error GA-B150M-D3H -- five beeps
« on: April 05, 2016, 11:59:09 pm »
I have a new build with a GA-B150M-D3H, Rev. 1 and an i5-6500. On initial boot attempt, I get five POST beeps.

The old AMI BIOS beep codes say that 5 beeps means CPU failure. A current list of UEFI codes from AMI shows "No Console Input or Output Devices are found."

I won't go through the static and handling precautions I took but I'm confident I caused no CPU damage. For the second possibility above both input and output devices are known good from other computers.

Question 1: Is a bad CPU the most likely problem? This is, I think, my 11th build over 15 years and never had a bad CPU before. I've tried re-seating, visual inspection, compressed air, etc. Both the chip and the socket look perfect.

Question 2: Is there a way to determine whether the problem lies with the CPU or with the motherboard? I don't have a PCI checkpoint card (POST card).

Thanks for any information or advice.

dmdilks

  • 3093
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: POST error GA-B150M-D3H -- five beeps
« Reply #1 on: April 06, 2016, 01:26:56 am »
What are you using for memory? We have seen a lot of problems with any thing over 2133 memory.
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: POST error GA-B150M-D3H -- five beeps
« Reply #2 on: April 08, 2016, 01:17:37 am »
Memory is G.SKILL Ripjaws V Series 8GB (2 x 4GB) 288-Pin DDR4 SDRAM DDR4 2133 (PC4 17000). Those are the same units listed on the "works with" memory list except Gigabyte lists the 16 GB part number.