Clearing the CMOS

[Larkina]

I have just tried to clear my CMOS but it didn't seem to clear all of my overclock settings save in the BIOS. I though when you cleared the CMOS it would default everything, all of the settings. I cleared the CMOS using my jumper pin on the motherboard. Should I have removed the battery? And does this mean that my motherboard is bork or need to be reflashed. Would someone please assist. Thank you in advance.

[manowargr]

Hello, go into bios and just load optimized default settings this will work.

[Larkina]

I've tried that but my overclock settings are still there. They won't change. Do you think my mobo maybe going bad? I've also tried "Fail Safe Defaults" with no luck.

[Larkina]

I just read something to the effect that if both BIOS doesn't match meaning the Main BIOS and the Backup BIOS then there maybe some conflict. I never knew that. But in my case I don't think this is the problem I don't think. After this is resolved then I will make both BIOS the same.

[nijel]

Reflash it. Sometimes helps.

[manowargr]

we cant help you if you dont tell us whats your system specs are.

[Dark Mantis]

Hi

When you cleared your CMOS you didn't do it correctly. You need to remove the battery and then short the jumper for a while and then replace the battery. After that go into the BIOS and load Optimised BIOS Defaults.

If you still have problems with this post back and I will tell you what to do next.

[Larkina]

I'm sorry my system specs are...

Homebuilt System
Ultra 998m Computer Case
GA-EP45-UD3P v1.6 Mobo
Windows 7 32bit
Intel Q6600 2.4GHz
Corsair H50 Liquid Cooling System
Push Pull configuration
TX750 PSU
2x2Gigs of RAM (GSkill PC2 8500
2 500G Western Digital HD RAID 0 Array
3 Noctua 120mm case fans
EVGA 8500gts 512MB Video Card
Realtek Integrated Audio

[Dark Mantis]

Have you now done an extended clear of the CMOS and loaded the Optimised BIOS Defaults ?