Right now I have AHCI set up and one hard drive.
I have my hard drive in SATA2_0
and my DVD in SATA_1
The other slot is used for a case hard drive dock for hot swapping, I don't use it but
it's connected to SATA_2.
The question was is there any difference in which slots you use for the main hard drive?
I read somewhere that there could be some difference.
Here's my system, no over clocking except for the GPU which I changed the profile to get rid of BSOD's with ATIKMpag.sys and ATIKMdag.sys
CPU: 17-875K
CPU COOLER: Cooler Master Hyper 212+
MB: GIGABYTE GA-P55-USB3 (rev. 2) BIOS: F9
ram: 4GB G.SKILL Ripjaws Series 1600
Speed DDR3 1600 (PC3 12800)
Cas Latency 7
Timing 7-8-7-24-2N
Voltage 1.65V (set to 1.64V)
GPU: XFX HD-577X-ZNFC 5770 1GB
PSU: CORSAIR 650TX
OS: Windows 7 home premium 64bit SP1
HD: SAMSUNG Spinpoint F3 HD103SJ 1TB
OPTICAL: ASUS DRW-24B1ST/BLK/B/AS
CASE: COOLER MASTER RC-692-KKN2 CM690 II Advanced
MOUSE: Microsoft IntelliMouse Optical 1.1A
KEYBOARD: Microsoft Comfort Curve Keyboard 2000
MONITOR: ASUS VH222H Black 21.5 (set to 1920X1080 75MHZ)
