Official GIGABYTE Forum

G1.Assassin Fan headers

G1.Assassin Fan headers
« on: September 01, 2011, 04:13:34 pm »
Heya guys having problem with my G1 assassin fan headers.

Fan header 1 and 3 do not report fan speed I have used 2 different fans that i have verified to work using the good fan headers.

Fans do run just no fan speed report.

Both headers where working when i first got the board know nothing.

Know I am having problems with the eStata/usb port on front panel. eSata works fine but when i plug in a usb thumb drive it gives me a message "One or more of the usb devices attach to computer has malfunction and windows can not recognize it".

The thumb drive works fine in other usb port.

Am I forgetting something in bios? or possible a driver issue? I'm going to check all the connection again just to make sure but something not right.

G1 Assassin bios F5b
 I7 960 stock speed
Redline Ridgeback Mushkin 999000
Ocz Vertex 2 SSD 60 gig
Gigabyte gtx 470 SOC
Seasonic 850 watt PSU
CoolerMaster Haf X case stock fans
latest drivers from Gigabyte website
« Last Edit: September 01, 2011, 04:24:10 pm by dannydag1 »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: G1.Assassin Fan headers
« Reply #1 on: September 01, 2011, 05:06:18 pm »
Hi

Try updating the Renasas drivers but first make sure that you have removed all traces of them. Use a program like Driver Sweeper or similar to make sure it is completely gone.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: G1.Assassin Fan headers
« Reply #2 on: September 01, 2011, 05:49:24 pm »
Thx for your speedy reply.
I will down load them again  and see what it does.

Re: G1.Assassin Fan headers
« Reply #3 on: September 01, 2011, 06:12:16 pm »
ok uninstalled drivers tried driver sweeper trial version and couldn't find NEC setting.

Reinstalled driver and still same thing.

Will try again later have to go for a while.

Is their any specific settings i should use in drive sweeper?
« Last Edit: September 01, 2011, 06:12:57 pm by dannydag1 »

Re: G1.Assassin Fan headers
« Reply #4 on: September 02, 2011, 02:54:15 pm »
Ok uninstalled drivers again and reinstalled still no go.

This is starting to scare me wonder whats next.

I guess what gets me even more is the amount of time that gigabyte support takes to even respond never had that problem with EVGA.


Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: G1.Assassin Fan headers
« Reply #5 on: September 02, 2011, 04:08:57 pm »
I guess what gets me even more is the amount of time that gigabyte support takes to even respond never had that problem with EVGA.

I know it is something that is complained about quite often and I can understand why but in their defence you have to remember that while we only have one problem to deal with at once they have very many and I suspect that they are incredibly busy.

Is the issue with the USB only on the front ports and are they USB 2 or USB3.0 ?

What BIOS version are you running and have you checked to see if there is an update available ?
« Last Edit: September 02, 2011, 04:12:11 pm by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: G1.Assassin Fan headers
« Reply #6 on: September 02, 2011, 06:33:55 pm »
Not trying to be mean just constructive criticism ;D and thx again for your response.

It is only the USB part of the "Esata/USB" hub on front panel it has been working since i bought motherboard and just noticed it stopped working a couple of days ago.

The 3.0 USB's on the front panel work fine.

Bios is F5B

The fan header 1 and 3 use to display fan speeds too when first bought the board.

I am going to go threw connections again couldn't last  yesterday and I'll report back

Cheers

P.S
Forgot to put in first post I'm running "Win 7 sp1 64 bit"

« Last Edit: September 02, 2011, 06:36:06 pm by dannydag1 »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: G1.Assassin Fan headers
« Reply #7 on: September 03, 2011, 08:33:06 am »
OK just let us know how it goes today and if the problem is still there. Have you checked the obvious like the cable connection to the motherboard and make sure it hasn't come adrift ?
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: G1.Assassin Fan headers
« Reply #8 on: September 04, 2011, 05:02:26 am »
Ya like I said in last post was checking cable still no go.

Also read post about sniper MB with same issue see he hasn't found solution either.

Starting to wonder hopefull gigabyte will have a fix soon.

Cheers
« Last Edit: September 04, 2011, 05:04:40 am by dannydag1 »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: G1.Assassin Fan headers
« Reply #9 on: September 04, 2011, 09:05:24 am »
I would still think it is down to the Renesas drivers most likely.

Have you tried disabling the C3/C6 etc in the BIOS ?  Maybe worth even disabling all the ppower saving modes for testing.
« Last Edit: September 04, 2011, 09:06:09 am by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy