Kingston Predator 4x4Gb kit 2400Mhz on Gigabyte GA-990XA-UD3

[Bobishon]

Please I need help how to setup DRAM in BIOS to work on manufacture frenquency. Thanks

[Bobishon]

I forget to said I have AMD FX4170

[Dark Mantis]

Hi

The modules should be automatically setup by the SPD data and motherboard/CPU. If you are just using the standard settings there shouldn't really be a problem if the BIOS is left to Auto. As long as the RAM is compatible with the motherboard it should go without any problems.

Of course it is also possible to enter all the details such as speed, voltage and timings manually but this is usually only done when someone is trying to overclock their memory. To do this you would have to enter the BIOS and physically change the settings of the memory from Auto to whatever was necessary.

[Bobishon]

When is set on auto my RAM work on 1333MHz, but when I use eocp profile 2000, 2400 or profile 1, I recive error message on startup

[Tiger]

GA-990XA-UD3
Specification:
3.Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules

AMD FX-Series FX-4170
http://www.cpu-world.com/CPUs/Bulldozer/AMD-FX-Series%20FX-4170%20FD4170FRW4KGU.html
Notes on AMD FD4170FRW4KGU
The fastest supported memory is DDR3-1866

You will need to overclock the CPU to achieve DDR3 2000MHz speed and higher. You may also have a better chance of getting that speed to work if you choose to use just two instead of four DRAM modules.

[Bobishon]

Thanks you Tiger, I'm just sad because I realy don't want to overclock my comp. But on the other side DRAM not working like is meant to be,