I checked all of those and changed instant off to 4 sec delay. Still have the problem.
The interesting this is that I didnt have the problem prior to installing the drivers. I am thinking the USB drivers are causing the problem. When I run powercfg -energy i get this report:
Errors
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Root Hub
Host Controller ID PCI\VEN_8086&DEV_3A3C
Host Controller Location PCI bus 0, device 26, function 7
Device ID USB\VID_8086&PID_3A3C
Port Path
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Root Hub
Host Controller ID PCI\VEN_8086&DEV_3A3A
Host Controller Location PCI bus 0, device 29, function 7
Device ID USB\VID_8086&PID_3A3A
Port Path
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name Generic USB Hub
Host Controller ID PCI\VEN_8086&DEV_3A3C
Host Controller Location PCI bus 0, device 26, function 7
Device ID USB\VID_0409&PID_005A
Port Path 1
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Composite Device
Host Controller ID PCI\VEN_8086&DEV_3A3C
Host Controller Location PCI bus 0, device 26, function 7
Device ID USB\VID_046D&PID_C521
Port Path 1,4
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Composite Device
Host Controller ID PCI\VEN_8086&DEV_3A3C
Host Controller Location PCI bus 0, device 26, function 7
Device ID USB\VID_046D&PID_C50C
Port Path 1,3
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Mass Storage Device
Host Controller ID PCI\VEN_8086&DEV_3A3A
Host Controller Location PCI bus 0, device 29, function 7
Device ID USB\VID_1307&PID_0330
Port Path 3
Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer.