Official GIGABYTE Forum

X4 955 Black edition and GA-M55SLI-S4 (rev. 2.0)

gurhan

  • 3
  • 0
X4 955 Black edition and GA-M55SLI-S4 (rev. 2.0)
« on: January 06, 2010, 01:39:33 am »
Hi there,

I have a motherboard (GA-M55SLI-S4 (rev. 2.0) with the bios version of F11j) which supports X4 955 but it does not say anything about BLACK EDITION in the CPU support page.

http://www.gigabyte.com.tw/Support/Motherboard/CPUSupport_Model.aspx?ProductID=2442

Do you think my motherboard can also work with X4 955 BE? I have done some research in google but I couldn't find the answer. 

Thank you.


Re: X4 955 Black edition and GA-M55SLI-S4 (rev. 2.0)
« Reply #1 on: January 06, 2010, 12:45:17 pm »
Yes it will. The BE is just an unlocked version of the regular x955.

gurhan

  • 3
  • 0
Re: X4 955 Black edition and GA-M55SLI-S4 (rev. 2.0)
« Reply #2 on: January 07, 2010, 09:04:19 am »
However I realised that they have included the not supported ones with N/A based on the bios version. It seems that this motherboard does not support that CPU. What do you reckon?
« Last Edit: January 07, 2010, 09:05:00 am by gurhan »

Re: X4 955 Black edition and GA-M55SLI-S4 (rev. 2.0)
« Reply #3 on: January 20, 2010, 09:09:32 pm »
urm. If the Locked edition works on the board then the unlocked one should too. There is no technical reason why not.

oggmonster

  • 659
  • 18
  • I can see Russia from my house
Re: X4 955 Black edition and GA-M55SLI-S4 (rev. 2.0)
« Reply #4 on: January 20, 2010, 09:25:49 pm »
As mercyground said, is no technical reason to why it shouldn't work. Although if you were worried then stick to the ones on the supported list, you should still be able to overclock fairly high, even without an unlocked multi :)
There's no place like ::1

gurhan

  • 3
  • 0
Re: X4 955 Black edition and GA-M55SLI-S4 (rev. 2.0)
« Reply #5 on: February 01, 2010, 12:39:34 pm »
Thank you very much for your suggestions guys.

oggmonster

  • 659
  • 18
  • I can see Russia from my house
Re: X4 955 Black edition and GA-M55SLI-S4 (rev. 2.0)
« Reply #6 on: February 08, 2010, 09:30:40 am »
Which CPU did you go for in the end?  :)
There's no place like ::1