Hi all !
Sorry for my poor English but I really need help and nobody in french forums find a way to my problem..
Here is the Fact_
My current system-
Windows 7 64bits
Gigabyte P67A-UD5-B3 (rev.1)
Intel I7 2600K (normal setting)
SLI GTX 460
16Go Ram 1333hz
Raid 0_ Western Digital 500go (total 1to) 16Mo cache (3gb/s) DD_SATA Drive connect in the motherboard on port SATA _2 and SATA_3
This is not the first Raid 0 I've made and usually it work well!
BUT today I wanted to made I knew RAID_0 with the newest WESTERN DIGITAL 1To 64Mo (6gb/s) and of course I wanted to use use the port SATA_0 and SATA_1 (normally able to use transfert data 6gb/s or 3gb/s) this what I've learned in the manual of the motherboard...
So I've just changed the 2 old DD by the new one , Checked the BIOS to be sure that I Still on RAID configuration... Created my new RAID with control-I setting.
I've put my original cd win 7 pro for install, the system started install but at the end windows told me that was not able to finish the installation on the current system... I'm being crazy... I've tried several times; changing some BIOS setup without results...
Could you help me? if you understand me
Thank's,
Roland.
