Official GIGABYTE Forum

New build, wont enter bios, blank screen. 970a-ds3p fx 8320, does post

Just built new system and having a few issues. I have a ga 970a-ds3p with fx 8320. It boots, beeps at me and the motherboard screen pops up. It gives me 3 options to press f9 for styterm information, f12 for boot configuration and q flash. Which ever i press it leads me to a blank screen. If nothing is pressed it will ask me to reboot and select a bootable media.Cant do that because I cant enter bios. Im using one g of ram to enter bios on start up.

Haven't q flashed it yet, is that a option, because on motherboard web site it does say this processor will work with a f1 bios update.

Any information will be appreciated.
« Last Edit: November 15, 2013, 09:23:48 am by pspowers »

autotech

  • 1553
  • 35
Re: New build, wont enter bios, blank screen. 970a-ds3p fx 8320, does post
« Reply #1 on: November 20, 2013, 03:47:02 am »
If you have another computer put your hard drive in it and initlize it then format it then put back in new buld.otherwise put in  os disk and change bios to boot from cd-usb whichever you use so you would hit f12. Also include what operating system you are using and size and make of hard drive.
GA-Z170X-UD5,Core i5-6600K,16 GIG,3200 ram ,2 X Corsair 240GB SATA III SSD, 500 gig HD,7 ult 64\, Rx-480 8gig\

Z97X-SOC GIGABYTE, I5 4670k, 16 gig 1600 ram, 240 gig sata3 SSD,1x 500HD/ R9 280x, corsair 650 RM PSU

GA-Z97X-Gaming G1,850 corsair,,DDR4 3200,240SSd,6950 video,850EVA