Official GIGABYTE Forum

Problem P35-DS3P Kingston KHX8500D2K2/4G

lvnona

  • 4
  • 0
Problem P35-DS3P Kingston KHX8500D2K2/4G
« on: February 18, 2010, 02:46:44 pm »
Hi !

Have problem:
I've GIGABYTE P35-DS3P, bios F12B, CPU Q6600 + KHX8500D2K2/4G (1066speed)
In Bios default i have 800, after changing 4` i got 1066 - but after some minutes working PC gos to restart - even if i increase voltage to 2.2.
Also - in CPUZ and other softwares memory show like i have PC2-6400. I check do i realy have KHX8500D2K2/4G - YES it's original !

Where is problem and how to solve it to increase speed?

Tnx.

gilgamesh

  • 160
  • 5
    • overclockerstech
Re: Problem P35-DS3P Kingston KHX8500D2K2/4G
« Reply #1 on: February 18, 2010, 02:54:33 pm »
Hi !

Have problem:
I've GIGABYTE P35-DS3P, bios F12B, CPU Q6600 + KHX8500D2K2/4G (1066speed)
In Bios default i have 800, after changing 4` i got 1066 - but after some minutes working PC gos to restart - even if i increase voltage to 2.2.
Also - in CPUZ and other softwares memory show like i have PC2-6400. I check do i realy have KHX8500D2K2/4G - YES it's original !

Where is problem and how to solve it to increase speed?

Tnx.


set to 4?
are you speaking of the memory strap ratio?

also what about ram timings? Can you please give us a little more information ?
www.overclockerstech.com , for the best in PC water cooling and hardware news

lvnona

  • 4
  • 0
Re: Problem P35-DS3P Kingston KHX8500D2K2/4G
« Reply #2 on: February 18, 2010, 03:16:26 pm »
Original timing at 1.8 5-5-5-18, but in my bios not possible to change timing.
So only way it is to change memory ration (4`) and then it shows 1066, but after some minutes to work or test at Prime95 get Hardware error !

Maybe i found solution about speed - update latest bios F12 - change ration to (4`) 1066mhz and start PRIME95 test - for now look stablish - but test continuing... but problem about windows or mother board recognizing of KHX8500D2K2/4G still exist - show me like i have PC2-6400, different softs: everst, cpu-z, memset 4.1

Any idea?

lvnona

  • 4
  • 0
Re: Problem P35-DS3P Kingston KHX8500D2K2/4G
« Reply #3 on: February 19, 2010, 06:40:23 am »
testing Prime95 1066 - Hardware failure after 1:52h
so new bios didn't help !

Weiting for some solution from you - experts !

gilgamesh

  • 160
  • 5
    • overclockerstech
Re: Problem P35-DS3P Kingston KHX8500D2K2/4G
« Reply #4 on: February 19, 2010, 03:59:00 pm »
Original timing at 1.8 5-5-5-18, but in my bios not possible to change timing.
So only way it is to change memory ration (4`) and then it shows 1066, but after some minutes to work or test at Prime95 get Hardware error !

Maybe i found solution about speed - update latest bios F12 - change ration to (4`) 1066mhz and start PRIME95 test - for now look stablish - but test continuing... but problem about windows or mother board recognizing of KHX8500D2K2/4G still exist - show me like i have PC2-6400, different softs: everst, cpu-z, memset 4.1

Any idea?

There should be an option to do this, usually gigabyte like to hide this stuff under a bios keyboard shortcut, but its been that long since i used a GBT boardi forget the shortcut.
www.overclockerstech.com , for the best in PC water cooling and hardware news

lvnona

  • 4
  • 0
Re: Problem P35-DS3P Kingston KHX8500D2K2/4G
« Reply #5 on: February 22, 2010, 07:34:43 am »
In my Bios not possible to change timing - i try by Memset, but this is not the point.
Most problem hot to change from 800 to 1066 ram speed and to make windows and system recognize right ram !
My mother board support 1066, but in memory support list i dont see my Ram - so this is the problem?
Anybody?