Official GIGABYTE Forum

VIA XHCI USB 3.0 driver fails to install on Win7 x64

rr72

  • 5
  • 0
VIA XHCI USB 3.0 driver fails to install on Win7 x64
« on: November 22, 2013, 05:37:05 pm »
Just completed a new build using a GA-78LMT-USB3 motherboard, rev 5.0.

Everything is fine except the VIA XHCI Host Controller (USB 3.0) driver will not install. This is on a brand new install of Windows 7 Home Premium 64-bit (no Service Pack). I am using the latest VIA driver from the Gigabyte product page (http://www.gigabyte.com/products/product-page.aspx?pid=4602#driver).

This is the error log:

Code: [Select]
    ****SETUP LOG INITATED +DATE+11-22-2013+TIME+11:38:29

 Enter X64app, argc = 3 ,argv[1]= 0x92, argv[2]= \WIN7\


  argv[1] Hex = 92,

 argv[2]= \WIN7\

  Close Utility Windows Success!

  Close Utility Windows Success!

Copy UAS driver: ERR=0
SetupCopyOEMInf: Path : C:\Users\User\DOCUME~1\Drivers\VIAUSB3\xhc\UAS_Client\x64\vusbstor.inf, ERR=0
XHCI driver INF file = C:\Users\User\DOCUME~1\Drivers\VIAUSB3\xhc\WIN7\X64\xhcdrv.inf

Hub driver INF file = C:\Users\User\DOCUME~1\Drivers\VIAUSB3\xhc\WIN7\X64\ViaHub3.inf

SetupCopyOEMInf: Path : C:\Users\User\DOCUME~1\Drivers\VIAUSB3\xhc\WIN7\X64\ViaHub3.inf, ERR=0

*********Enter Install USBDrv ********
Note, this code has a potential bug. It assume the OS is installed under C:\Windows

Command = C:\Windows\System32\Expand.exe "C:\Windows\Driver Cache\AMD64\driver.cab" -F:USBD.SYS C:\Windows\System32\drivers
OS dwMajorVersion = 6 dwMinorVersion = 1
OS wServicePackMajo = 0 wServicePackMinor = 0
********* No need to install USBD.SYS ********
Copy Hub driver ERR = 0


  SetupLibX64_CheckChipExistRemove : Enter SetupLib_CheckChipExistRemove Device ID = PCI\VEN_1106&DEV_3432

  SetupLibX64_CheckChipExistRemove : Check HW Fail, Error ID = 103


  SetupLibX64_CheckChipExistRemove : Enter SetupLib_CheckChipExistRemove Device ID = PCI\VEN_1106&DEV_9201

  SetupLibX64_CheckChipExistRemove : Check HW Fail, Error ID = 103


  SetupLibX64_CheckChipExistRemove : Enter SetupLib_CheckChipExistRemove Device ID = PCI\VEN_1106&DEV_3483

  SetupLibX64_CheckChipExistRemove : Check HW Success


  SetupLibX64_UpdateK8 : enter cmdUpdate

  SetupLibX64_UpdateK8 : HWID = PCI\VEN_1106&DEV_3483, InfPath = C:\Users\User\DOCUME~1\Drivers\VIAUSB3\xhc\WIN7\X64\xhcdrv.inf ,

  SetupLibX64_UpdateK8 : Error Code = 422

Update XHCI driver fail, GetLastError code = 0xb7h

SETUP LOG:  DATE 11-22-2013 TIME 11:38:32
 
 
Fail to Installed components :
VIA XHCI Host Controller Driver   V2.10C

Likewise, when I attempt to update the driver automatically from Device Manager, I get this:



Thanks to anyone who can help.
Gigabyte GA-78LMT-USB3 (rev. 5.0, BIOS ver. FA) / AMD FX-4130 Black Edition @ 3.8GHz / 8GB (2x4GB) G.SKILL Sniper DDR3-1600 / NVIDIA GeForce GTX 560 Ti 1GB / Seagate 250GB SATA / WD 500GB SATA / HGST 1TB SATA / Antec EarthWatts 650W / Antec Three Hundred Mid Tower / Windows 7 Home Premium 64-bit

autotech

  • 1553
  • 35
Re: VIA XHCI USB 3.0 driver fails to install on Win7 x64
« Reply #1 on: November 23, 2013, 01:36:04 am »
I would install sp1 first then try again.
GA-Z170X-UD5,Core i5-6600K,16 GIG,3200 ram ,2 X Corsair 240GB SATA III SSD, 500 gig HD,7 ult 64\, Rx-480 8gig\

Z97X-SOC GIGABYTE, I5 4670k, 16 gig 1600 ram, 240 gig sata3 SSD,1x 500HD/ R9 280x, corsair 650 RM PSU

GA-Z97X-Gaming G1,850 corsair,,DDR4 3200,240SSd,6950 video,850EVA

rr72

  • 5
  • 0
Re: VIA XHCI USB 3.0 driver fails to install on Win7 x64
« Reply #2 on: November 23, 2013, 08:45:47 pm »
It turned out to be the order in which I installed the drivers, strangely enough (or that seems the most likely at this point, anyway). I attempted to install this driver before the chipset driver and ran into the errors, even after I then installed the chipset driver. I performed a clean re-install of Windows, after which I installed the chipset, then the USB 3.0 driver. That fixed my problem.
Gigabyte GA-78LMT-USB3 (rev. 5.0, BIOS ver. FA) / AMD FX-4130 Black Edition @ 3.8GHz / 8GB (2x4GB) G.SKILL Sniper DDR3-1600 / NVIDIA GeForce GTX 560 Ti 1GB / Seagate 250GB SATA / WD 500GB SATA / HGST 1TB SATA / Antec EarthWatts 650W / Antec Three Hundred Mid Tower / Windows 7 Home Premium 64-bit

Re: VIA XHCI USB 3.0 driver fails to install on Win7 x64
« Reply #3 on: January 16, 2014, 05:19:08 am »
BUMP,
I'm having a similar problem. I just built the system but the front and rear USB are not working. System says the USB controller is missing. I searched for drivers. Reinstalled the chip set drivers then the USB drivers. I verified the USB was activated in the BIOS and then did a clean install of all software and still nothing. The Drives I plug into the USB are spinning and getting power, but that's it. Any help is appreciated. I've got 48 hours to get this system running before I'm out in the field for 8 weeks.

MisterEd

  • 75
  • 1
Re: VIA XHCI USB 3.0 driver fails to install on Win7 x64
« Reply #4 on: January 16, 2014, 06:01:49 am »
BUMP,
I'm having a similar problem. I just built the system but the front and rear USB are not working. System says the USB controller is missing. I searched for drivers. Reinstalled the chip set drivers then the USB drivers. I verified the USB was activated in the BIOS and then did a clean install of all software and still nothing. The Drives I plug into the USB are spinning and getting power, but that's it. Any help is appreciated. I've got 48 hours to get this system running before I'm out in the field for 8 weeks.

Are you saying that none of the USB ports are working? The USB 2.0 ports are controlled by the chipset while the USB 3.0 ports are controlled by a separate VIA chip. They have separate drivers. It would be strange if none of them were working.
Gigabyte GA-990FXA-UD3 v1.0 | AMD FX-8350 | Corsair H60 | GSkill RipjawsX (2x4GB) | ASUS GeForce GTX 560 | Windows 7 Ult 64-bit
ASUS M4N82 Deluxe | AMD Phenom II X4 960T | Corsair XMS2 (4x2GB) | PNY GeForce GTS 250 | Windows 7 Home Prem  64-bit

Kess

  • 2
  • 0
Re: VIA XHCI USB 3.0 driver fails to install on Win7 x64
« Reply #5 on: July 31, 2014, 08:19:19 pm »
I've got pretty much the same problem with a new GA-78LMT-USB3 board (v5.0).  The USB3 ports don't work at all, the VIA driver installer aborts because it says it cannot detect any hardware, and there's no sign of any USB3 ports or xHCI devices in the Device Manager. 

The USB3 controller is definitely enabled in the BIOS.

Is there anything else I can try before rejecting the board as faulty?

Re: VIA XHCI USB 3.0 driver fails to install on Win7 x64
« Reply #6 on: September 10, 2014, 07:54:54 am »
I've got pretty much the same problem with a new GA-78LMT-USB3 board (v5.0).  The USB3 ports don't work at all, the VIA driver installer aborts because it says it cannot detect any hardware, and there's no sign of any USB3 ports or xHCI devices in the Device Manager. 

The USB3 controller is definitely enabled in the BIOS.

Is there anything else I can try before rejecting the board as faulty?


Got the same problem reinstalling w7 on a ga-78lmt-usb3 and a ga-990fxa-ud3. Be sure to chose your mobo's correct rev at gigabyte's download site.
78lmt rev 5.0 uses VIA and rev 4.1 uses etron.. Same for the ga-990, I made the mistake of clicking the first google result and it sent me to rev 1.0.... of course the driver didn't work but as soon as I realized this everything went fine.

gtp29

  • 2
  • 0
Re: VIA XHCI USB 3.0 driver fails to install on Win7 x64
« Reply #7 on: September 29, 2014, 07:31:20 pm »
I had two identical 78LMT-USB3 rev 5 boards with FX 4130 CPU and 4x4GB Kingston HyperBlu 1600, one worked perfectly and one had all of the problems listed above, I have RMA'd the faulty board. I am also having the same problems on a 970A-DS3P, cannot install win7 or Win 8.1 and dopn't know where to go next other than another RMA. With the 970A-DS3P I have tried it with F1 & F2H vers of BIOS, no difference. On my boards that worked, they eventually loaded "0100 (Microsoft) XHCI drivers" after I had failed witty drivers from Gigabyte and VIA. I had no issues with a 78LMT-USB3 Rev4 other than having to maqnually clock the RAM chips. I have another Asus Board with an A10-5800K and that also worked. All had HD6670 video cards & 4 HDD & 2 optical drives and 2 had Corsair C600 PSU and 2 had X-Viper 650 watt PSU. I have 40 years IT experience and these have been some of the weirdest issues I have  ever seen.

electricdragon

  • 1
  • 0
  • I'm Dragon, who are you?
    • Official Twitter
Re: VIA XHCI USB 3.0 driver fails to install on Win7 x64
« Reply #8 on: April 09, 2017, 09:39:33 am »
The same problem happens on the Rev 6.0 78LMT-USB3 board (VIA chipset), so I'm assuming it's a driver problem myself.

I have two Rev 6.0 boards and to avoid any issues, what I did was disable USB3 in the BIOS and then added a PCI USB2 card. USB3 isn't really a big deal for me as none of my external drives use USB3 (one did, but I removed it out of the plastic Seagate case and installed it in a Probox USB2 enclosure).
DRGN: Define Mini C | 78LMT-USB3 6.0 | FX-8350 | Shadow Rock LP | 16GB DDR3 | R5 230 | RM650x | 5.14TB HDD | TG-3468 | 4+1 USB | VX2252mh | Minx M5

Qi: Define Mini C | 78LMT-USB3 6.0 | FX-8350 | Hyper TX3 Evo | 8GB DDR3 | Radeon HD3000 | NPS 500 | 4TB HDD | TG-3468 | 4+1 USB | 720p LCD TV | M3200BT