Official GIGABYTE Forum

Poll

i can set the multiplier in the bios to above 32 i.e. 44 but when i run cpuz, it shows only 3.2ghz as well as aida 64 stress test and overclock detection. i tried f9 bios and the beta bios f9c but the f9c freezes up most of the time. any suggestions? than

email me
0 (0%)
reply to post
0 (0%)
thank you
0 (0%)

Total Members Voted: 0

g3258 cant overclock using z87x-d3h.

rcd

  • 1
  • 0
g3258 cant overclock using z87x-d3h.
« on: July 26, 2014, 08:37:57 am »
 :-[

i can set the multiplier in the bios to above 32 i.e. 44 but when i run cpuz, it shows only 3.2ghz as well as aida 64 stress test and overclock detection. i tried f9 bios and the beta bios f9c but the f9c freezes up most of the time. any suggestions? thank you

autotech

  • 1553
  • 35
Re: g3258 cant overclock using z87x-d3h.
« Reply #1 on: August 20, 2014, 02:30:37 am »
if you change it to 34 does it stay there. Try one level at a time. It could be 44 is to high and so motherboard defaults back to 32.
GA-Z170X-UD5,Core i5-6600K,16 GIG,3200 ram ,2 X Corsair 240GB SATA III SSD, 500 gig HD,7 ult 64\, Rx-480 8gig\

Z97X-SOC GIGABYTE, I5 4670k, 16 gig 1600 ram, 240 gig sata3 SSD,1x 500HD/ R9 280x, corsair 650 RM PSU

GA-Z97X-Gaming G1,850 corsair,,DDR4 3200,240SSd,6950 video,850EVA