HD's not showing up

[Dirtnapper]

I have two WD 250 Caviar hd's I put into the system. However, they do not show up and I do not see them in BIOS as well. They are on the Marvel ports, GSATA3 6/7. Intel ports are full.  The Marvel driver and  storage utility are both installed. I would like to use them for extra storage. Thanks.

[absic]

Stupid question but, you have enabled the Marvell Controller in BIOS?

[Dirtnapper]

Checked BIOS and it looks ok.

[Dirtnapper]

Update: I switched the hd's to the ports 0 and 2 and they now show up. It appears maybe  ports 1 and 3 might have an issue. I also updated BIOS to F9. Any ideas on this?
Thanks.

[Dirtnapper]

I have a Xship from Gigabyte due in Monday, I hope the replacement board solves this Marvell issue as well as the USB ports.

[Dirtnapper]

Got the replacement, however, only one port on the Marvell chip works. Tried different hd's and cables from the Intel chip and only port0 works.  I also got the same rev 1 mobo, not a newer revision.