H97N-WIFI and G.SKILL RAPJAWS F3-10666CL9D-4GBXL

[Fonta]

Hi, i'm mb HN97-WIFI rev1.0 , CoreI3 4130 and two modules DDR3 G.SKILL RAPJAWS F3-10666CL9D-4GBXL but not start.

These same modules work in another PC.

Incompatible?

it's funny. the G.Skill says on the web that is compatible 

Bye

[Manxminx]

When you say not start do you mean it won't even boot into the bios?

Silly question but are you sure you've fully inserted them into the slots?

Take one module out and see if you can turn on your PC. Then take it out and do the same with the other module. Try this with all the mother board slots.

If you can get it to boot into bios download and run Memtest86 http://www.memtest86.com/

Good luck,
Ali.

[Fonta]

Hello, I tested the ram modules one by one in another pc work well, memtest does not fail.
H97N with other modules make it work.
These modules do not work in that board, does not show bios.
Bye