Official GIGABYTE Forum

Z97x Gaming 7 slow to post code 64

Dalork

  • 15
  • 0
Z97x Gaming 7 slow to post code 64
« on: November 19, 2014, 06:23:47 am »
Got windows 8.1 on a crucial M500 SSD, i5 4690k on a Gigabyte z97x gaming 7 MB with 16GB (4x4), has got slow to boot for some reason. During post check the computer seems to sit on code 64 for a while before booting windows, it's getting longer and once or twice seemed as though it may have hung at this point.

Running BIOS F6, any ideas? I see there are many more beta BIOS versions, does anyone know if they might be to help with a issue such as this? GB's website lists the current official BIOS still as F6. Have not overclocked it and windows boots fine and system doesn't seem to fail memory or CPU stress tests etc.


shadowsports

  • 2243
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Z97x Gaming 7 slow to post code 64
« Reply #1 on: November 19, 2014, 03:57:47 pm »
Seemed to hang or did hang at boot?
What is your boot time from pressing power button to desktop?

Please unplug your system
Carefully reseat all 4 memory modules
Retest
If same
***Try reseating CPU as well.  If you perform this step, be sure to inspect the socket carefully for bent or mis-aligned pins.
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

Dalork

  • 15
  • 0
Re: Z97x Gaming 7 slow to post code 64
« Reply #2 on: November 19, 2014, 07:37:53 pm »
Thanks for the help Shadowsports,

Last 2 days it appears to hang, I let it sit for 5 mins or so and it just sits there showing code 64. I don't know if it eventually boots into windows, saw no reason for leaving it that long to test. The system was working fine for months, so I doubt it's bent cpu pins or that should have presented itself much earlier wouldn't it?

I already tried reseating everything except the cpu only because I don't have any TIM handy, will have to buy some more.

Boot time from pressing power button used to be less than a minute to desktop, it's been getting slower for a month or so taking about 3 mins showing it sitting on code 64 and then it would finish going through post and windows would load.

Last 3 start-ups now it has just stopped at code 64 and that's it for 5 mins, if I restart the computer it will post and boot up into windows.

Nothing new has been fitted or changed to hardware or software, only changes to the system over past few months would be software updates I guess.

I ran stress tests and memory seems fine and cpu seems ok, no fault and max cpu temps were 48-50 Celsius with a rather hot ambient room temp of 34 degrees. idle temps are 18-22.

I'll get some TIM and try reseating CPU and checking pins anyway next pay.

shadowsports

  • 2243
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Z97x Gaming 7 slow to post code 64
« Reply #3 on: November 20, 2014, 05:06:54 am »
Before moving forward please remove 2 sticks of RAM, reconnect power and retest.  Try alternating the sticks as well.  first 2, then second 2.  If there is no change, continue.  Check CPU socket.  If you get a clean/fast boot by pressing the power or reset button after this Qcode 64 hang, You may also want to look at your power supply as another possible cause.   
« Last Edit: November 20, 2014, 05:11:39 am by shadowsports »
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

autotech

  • 1553
  • 35
Re: Z97x Gaming 7 slow to post code 64
« Reply #4 on: November 21, 2014, 02:13:25 pm »
OK here is a shot. Strip it down to cpu, 1 stick ram, hard drive. If you have onboard graphics use it instead of a video card. If not then you have to use video card also. Keyboard and mouse only. Now that it is stripped down take the power cord off and battery out and leave it out for 10 minutes. Then put battery back in and start it up. Does it still hang after that.

If so you might try flashing the bios and then start it stripped down. If this solves it add 1 piece of ram at a time till everything is back as it should be.

Code 64 is a CPU code.
GA-Z170X-UD5,Core i5-6600K,16 GIG,3200 ram ,2 X Corsair 240GB SATA III SSD, 500 gig HD,7 ult 64\, Rx-480 8gig\

Z97X-SOC GIGABYTE, I5 4670k, 16 gig 1600 ram, 240 gig sata3 SSD,1x 500HD/ R9 280x, corsair 650 RM PSU

GA-Z97X-Gaming G1,850 corsair,,DDR4 3200,240SSd,6950 video,850EVA

Dalork

  • 15
  • 0
Re: Z97x Gaming 7 slow to post code 64
« Reply #5 on: November 22, 2014, 07:46:45 pm »
Thanks for the help guys, I will strip it down to the basic min and test it soon as thermal paste turns up. Takes about 8 days for it by post so I'll have a week to wait.

ATM I'm just leaving the system powered up, everything in the computer is still under warranty (think is only 6 months old). I suspect it's the MB starting to fail or maybe the PSU (RM750), might see if I can borrow a working PSU though the week and check that side of it. Ram is couple years old but worked without a hick-up so far in previous system and this one till now.

Yes code 64 is a cpu error code, it's the driver execution environment start-up point I think. 
« Last Edit: November 22, 2014, 09:01:53 pm by Dalork »

Dalork

  • 15
  • 0
Re: Z97x Gaming 7 slow to post code 64
« Reply #6 on: December 10, 2014, 01:50:00 am »
Well pulled the system down then put cpu, 1 stick of ram and ssd back in, all worked as it should and booted fine. Then added each item 1 thing at a time and booted computer. All works fine and I have everything plugged back in, all seems to be as it should.

Then after a day or two it gets slow again sitting at the debug code 64, but does then load windows. Hasn't stopped on the 64 and not booted up yet but I suspect it will over the next few days/weeks again just as before.

I'm running Bios F6, most current listed as official on Gigabytes website for this board. There is several more beta versions though now up to F7, so I wonder if they are having issues. Should I try the latest beta version or stay with the official version F6 (which is the minimum I can use for this board with a i5 4690K).

I'm at a loss as to what's wrong though, seems to run fine for weeks to several months and then starts having issues again. I think windows 8.1 is loaded as MBR (not GPT). Doesn't seem to be a hot or cold boot/running issue, cpu is running cool (13 degrees Celsius is the lowest idle on a cool day and on a extremely hot day running prime 95 it hits high 40's) at idle and even fairly cool being stress tested.

Dalork

  • 15
  • 0
Re: Z97x Gaming 7 slow to post code 64
« Reply #7 on: December 10, 2014, 02:23:58 am »
Tried flashing the latest beta bios F7, didn't seem to help either. Still the same as before.

Dalork

  • 15
  • 0
Re: Z97x Gaming 7 slow to post code 64
« Reply #8 on: December 11, 2014, 08:55:46 pm »
update:

After seeing no improvement from the latest Beta BIOS (F7) I re-flashed back to BIOS F6 and things have improved. I timed start-ups with a stop watch, initial time for it to go through post is lightening fast (as it used to be) takes 3 seconds.

Then it sits at code 64 for 22 to 25 seconds, then it proceeds with a few more codes very quickly (too fast to read most of them) finishing post and boots windows. This part is working as it should very quickly taking a total of about 8 to 12 seconds to reach desktop (windows loaded).

So from pressing power button to reaching desktop takes 38 to 41 seconds in total, so under 1 minute and everything is loaded and computer is good to go for normal use. Seems to have stayed that way for quite a few start-up/restarts (warm boots) and also was the same after sitting all night and then having a fresh cold boot.

Strange but seems ok now (did not try reseating or touching any hardware, just reverting back to BIOS F6) but will see what happens over the next few days/weeks. I have no idea of what timing is normal for post to sit at code 64 (CPU driver execution) but I think total boot time to desktop of under 1 minute is very good and I'm happy.

I have been told/suggested that some of the newer Gigabyte motherboards and Corsair power supplies don't go together so well for some reason but I don't think that is the issue here. I also just wanted to give thanks Shadowsports and Autotech for their time, help and input.

dmdilks

  • 3078
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Z97x Gaming 7 slow to post code 64
« Reply #9 on: December 11, 2014, 10:41:26 pm »
One guy over on tom's hardware said he did this:  fixed my mine, with one ram stick on the far left slot. Then once you get it to boot add the other sticks one at a time.
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: Z97x Gaming 7 slow to post code 64
« Reply #10 on: March 11, 2015, 04:51:13 am »
Yo, sorry for the bump, but i'm having the same issue as Dalork. My Z97X Gaming 7 board will randomly get code 64 when powering on, especially when it's been off for several hours. It's got an i5-4690k, 2x4GB RAM, and is running Windows 7 on an Intel 730 SSD. It'll power on and run through several codes, then hang up on 64 until I manually cycle the power. I'm not overclocking any components aside from adjusting my RAM, but I still get the code even when the CMOS is reset to default.

I've tried re-seating all of my components, upgraded and downgraded the BIOS, and exchanged my RAM and motherboard at Micro Center, the issue still persists. It only happens 1 out of every 5 times I power it on, every other time, it boots properly and runs exactly as it should, very quick and responsive. What's more, if I power it off and on repeatedly to test it, it always passes, it only throws the code if it's been powered off for a while.

The only thing that comes to mind could be my power supply (Corsair CX750M) or the CPU, I've gotten the code running with just the CPU and one RAM module in slot 0, so I know it's not any drives or the GPU. I'd try exchanging them, but yesterday was the end of my 30-day return period, so I don't have that net to fall back on. Maybe if I see the same dude behind the customer service counter, he'll hook me up.

Once again, i've tried a completely new motherboard and RAM, re-seated every other component twice, and tried every fix on the first page of Google. I've just been leaving it on and suspending it in the meantime, it's not a critical issue, but an issue nonetheless. Anyone else having this issue?

ex58

  • 854
  • 37
Re: Z97x Gaming 7 slow to post code 64
« Reply #11 on: March 11, 2015, 10:08:42 am »
Somehow, my is related to USB3 ports.
Empty USB3 ports....post code 64 for almost 60 seconds.
Anything plugin (USB stick, Samsung S5,....etc) booting normal.
« Last Edit: March 11, 2015, 10:09:20 am by ex58 »

Re: Z97x Gaming 7 slow to post code 64
« Reply #12 on: March 12, 2015, 03:39:15 am »
Somehow, my is related to USB3 ports.
Empty USB3 ports....post code 64 for almost 60 seconds.
Anything plugin (USB stick, Samsung S5,....etc) booting normal.

Interesting, as i'm only using my USB 2.0 ports on the back for my mouse and keyboard. I switched them both to 3.0 and haven't noticed an immediate difference, but once again, it won't hang up if i'm resetting it repeatedly to test it. I'll keep posted, though.

ex58

  • 854
  • 37
Re: Z97x Gaming 7 slow to post code 64
« Reply #13 on: March 12, 2015, 05:33:08 am »
Resetting is always OK for me......just cold boot are affected.
Do you have any USB flash drive?

Re: Z97x Gaming 7 slow to post code 64
« Reply #14 on: March 18, 2015, 11:52:44 pm »
Sorry for the late reply, been busy with work and school. I still receive code 64, with seemingly increasing frequency. Last week I encountered it three times in a row, after a routine reboot (the computer had been on for about 5 hours). A few hours ago, I took my i5-4690k to Micro Center and they swapped it out for an i7-4790k, but I still get the issue.

I might have an extra return period for the exchanged motherboard, so I may swap it out for another model, this board's given me a bad experience. When my old man and I built our first computer back in the day, we used a gigabyte board, and i've used gigabyte boards since, just sucks that this one's giving me so much trouble.

Resetting is always OK for me......just cold boot are affected.
Do you have any USB flash drive?

I'd thought that cold-booting was the only way to generate the code, but I received it three times in a row after a reboot last week. I've got a drawer full of USB drives, but the only devices I have plugged into the computer on boot are my mouse and keyboard.