Official GIGABYTE Forum

Windows 10: "This Driver Can't Release to Failure!!!" Error

Windows 10: "This Driver Can't Release to Failure!!!" Error
« on: August 06, 2015, 06:46:26 am »
Hi All

Well recently I got the windows 10 upgrade for my zoostorm PC that originally came with Windows 8.1, and I have realized that the GIGABYTE App center + All apps from GIGABYTE have been giving the same message.

"This Driver Can't Release to Failure!!!"

I have been searching for a solution and I can't find any so help would be appreciated!!

I may just downgrade back to windows 8.1 as I had no errors with the app center then.

Re: Windows 10: "This Driver Can't Release to Failure!!!" Error
« Reply #1 on: August 07, 2015, 11:38:27 am »
Hi All

Well recently I got the windows 10 upgrade for my zoostorm PC that originally came with Windows 8.1, and I have realized that the GIGABYTE App center + All apps from GIGABYTE have been giving the same message.

"This Driver Can't Release to Failure!!!"

I have been searching for a solution and I can't find any so help would be appreciated!!

 :-[ :-[ :-[ :-[ :-[ I have the same problem and it popping up all over the internet .I came here expecting a apology and its been worked on but nothing ,very disappointing   "This Driver Can't Release to Failure!!!" windows 10 fix !!!

I may just downgrade back to windows 8.1 as I had no errors with the app center then.

S1mn

  • 1
  • 0
Re: Windows 10: "This Driver Can't Release to Failure!!!" Error
« Reply #2 on: August 28, 2015, 12:31:10 pm »
Hi All

Well recently I got the windows 10 upgrade for my zoostorm PC that originally came with Windows 8.1, and I have realized that the GIGABYTE App center + All apps from GIGABYTE have been giving the same message.

"This Driver Can't Release to Failure!!!"

I have been searching for a solution and I can't find any so help would be appreciated!!

 :-[ :-[ :-[ :-[ :-[ I have the same problem and it popping up all over the internet .I came here expecting a apology and its been worked on but nothing ,very disappointing   "This Driver Can't Release to Failure!!!" windows 10 fix !!!

I may just downgrade back to windows 8.1 as I had no errors with the app center then.
The same problem.Help us, Please!
« Last Edit: August 28, 2015, 12:31:46 pm by S1mn »

Re: Windows 10: "This Driver Can't Release to Failure!!!" Error
« Reply #3 on: August 30, 2015, 03:00:08 pm »
I have the same problem after upgrading to Windows 10 >:(
« Last Edit: August 30, 2015, 03:17:43 pm by HenkEijkenaar »

Re: Windows 10: "This Driver Can't Release to Failure!!!" Error
« Reply #4 on: November 11, 2015, 02:07:03 pm »
If you uninstall all Gigabyte drivers and utilities, then reinstall them in Win 10, this will fix the issue.

Re: Windows 10: "This Driver Can't Release to Failure!!!" Error
« Reply #5 on: December 07, 2015, 11:31:00 pm »
Possible solution 1:
Cause - Components of APP Center require access to on-board Wi-Fi. Where no on-board Wi-Fi exists the components fail.
Components - Cloud Server Station, GIGABYTE Remote and Remote OC.
Solution;
Open APP Center (from System Tray - bottom right of your screen)
Click on the tabs for each of the 3 components listed above.
Look for the radio switch button titled "Always run on next reboot" - Turn switch OFF

If you require the use of any of the above components, goto solution #2 (below)

Possible solution 2:
Cause - APP Center components not compatible with Windows 10
Solution - install the latest version of APP Center (or only the components you require) available on the Gigabyte Downloads page (http://www.gigabyte.com.au/products/product-page.aspx?pid=5362&dl=1&RWD=0#utility).
The current version of the APP Center (at the time of writing this post) is B15.0916

Good luck.
I hope this helps.

 

anything