Official GIGABYTE Forum

Gigabyte 990fxa-ud3 rev4.0 custom bios

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #45 on: May 13, 2016, 07:03:14 pm »
BIOS custom 990fxa ud3 4.0 v6

Change:EFI Realtek UNDI 2.036
(Previus of regit 990FXA-UD3 4.0 v5)

https://drive.google.com/folderview?id=0B1PruOcm5ygMaTdYVVdYeVBRUms&usp=drive_web
« Last Edit: May 13, 2016, 07:08:55 pm by jorgecorazondeleon »

AgentFXA

  • 372
  • 16
    • none
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #46 on: May 13, 2016, 11:39:16 pm »
Thanks Jorge,
works fine and looks like this is becoming sort of a new sport - EFI bios updating!?



X470 Aorus Gaming / Ryzen 2700x / GV-RX570AORUS-4GD / 16 GB HyperX Predator 3200  / SeaSonic 650W / Tt View 71 TG / Win10x64

Zyrocenus

  • 5
  • 0
  • Recent AMD defector :)
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #47 on: May 15, 2016, 09:30:08 pm »
Hello again,

I was beginning to think this thread was dead. 

Can anyone confirm my previous observations?  Is anyone able to adjust their NB \ HT separately? I have to leave it set to auto as I have said or it fails almost 100% of the time.  The only way I can raise HT and NB clocks is to overclock the FSB.  Can anyone confirm this?

Thanks for the update to the bios, every little bit counts.  EFI is wasted on me though, in my opinion it offers no home user benefits over legacy.  Secure Boot to me is like eXecute Disable Bit 2.0 or "Boot Time Virus Protection" 3.0 lol.  Please correct me if I am wrong, but in speaking with our regional I.T. at work that's what we came up with, essentially useless with no performance gains over legacy.  I welcome input on this as well as I have avoided implementing EFI over legacy because of this view I have.

Zyro
I will not rest until my "new" 8350 blows the doors off my 8 year old deceased Q9550 setup

AgentFXA

  • 372
  • 16
    • none
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #48 on: May 15, 2016, 11:48:34 pm »
...  Is anyone able to adjust their NB \ HT separately? I have to leave it set to auto as I have said or it fails almost 100% of the time.  .........

Yes, you can adjust both separately but anything beyond 2200/2600 (default) will not boot or freeze while booting - maybe voltage adjustment needed? However, as mentioned before, I am not into that.

EFI advantages are support for bigger HDD storage (2+ TB) and more partitions (4+ partitions per drive) including fault management. I am using UEFI boot since quite a while and it works nicely and is better responsive overall. The only setback is that most diagnostic tools fail on UEFI devices - like partition resizing etc. Windows7 Disk Management is limited too on EFI devices. Other than this all is working fine.

X470 Aorus Gaming / Ryzen 2700x / GV-RX570AORUS-4GD / 16 GB HyperX Predator 3200  / SeaSonic 650W / Tt View 71 TG / Win10x64

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #49 on: May 23, 2016, 10:25:29 am »
Is it possible to edit a multiplier higher than 10x on RAM speed ?
got 2400mhz Rams but cant get higher than 10x... so i have to speed up the Bus (220mhz) .. but not everything likes the 220mhz  :'( so I have to set up the voltages a bit high...


http://valid.x86.fr/t6iauf
« Last Edit: May 23, 2016, 10:46:43 am by LuDotUn »

AgentFXA

  • 372
  • 16
    • none
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #50 on: May 23, 2016, 11:13:57 am »
Wa?
....your 95xx CPU supports up to 2133 ram speed hence sounds about right!
http://support.amd.com/en-us/search/faq/295

« Last Edit: May 23, 2016, 11:16:12 am by AgentFXA »
X470 Aorus Gaming / Ryzen 2700x / GV-RX570AORUS-4GD / 16 GB HyperX Predator 3200  / SeaSonic 650W / Tt View 71 TG / Win10x64

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #51 on: May 23, 2016, 11:21:00 am »
exactly officially it only runs at 2133 mhz, my run at about 2300MHz and I want more .. would be good if I can fix it on the Multi instead of the Base Clock  :'(

AgentFXA

  • 372
  • 16
    • none
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #52 on: May 23, 2016, 11:35:13 am »
I would think it's locked there for a reason.
The 9xxx series CPUs are hot beasts and not good at oc'ing at all ... it's an 8350 oc'ed to the max.

X470 Aorus Gaming / Ryzen 2700x / GV-RX570AORUS-4GD / 16 GB HyperX Predator 3200  / SeaSonic 650W / Tt View 71 TG / Win10x64

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #53 on: May 23, 2016, 11:47:42 am »
i had the 8320E before .. at same speed and same voltage (yeah strange world^^) is the FX9590 colder  ???

i dont know why but thats good for me :D
and my Corshair H80i is doing a good job, i just hit few times more than 70°c with the CPU (Stresstest like Prime95 and few testings on fan-settings)


But it still would be nice if someone can unlock the multiplier  :)

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #54 on: May 25, 2016, 09:34:50 pm »
Could this work on a 990FXA-ud3 non rev4?
« Last Edit: May 25, 2016, 09:36:37 pm by Virus1x »

regit

  • 53
  • 1
  • Donate me: https://www.paypal.me/regit66
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #55 on: May 26, 2016, 04:21:24 pm »

Could this work on a 990FXA-ud3 non rev4?


It is only for rev 4.0.

What is your motherboard?

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #56 on: May 29, 2016, 11:41:10 am »
Hi
I made new bios to Gigabyte 990fxa-ud3 rev4.0
i don test because dont have motherboard ,but should work fine.

thank you.

a month ago my pc started to crash under load and few times I had to use start clean thingy in WX, well i tryed to update drivers back and forward and then the bios, now lucky for me how flashing bios today is plug and play,

I updated to 9FXAUD34.F3 and in the end got it working for idle things like youtube etc... but any real load it it would freeze up with in minutes.

now with 990fxa ud3 4.0 v6 with bios mostly set to auto, boster and tree hugger thingys disable, it made it thru p95 and at this time core 4,7@ 1.5v multipier 23.5

memory profile xmp does still not work and stil im only getting 667 works

but I can play game and in a quick test up to 120 fps in dying light cpu some part almost at 100% but the Tri-X R9 390X in lane 1 was running up to 79c but gigabyte r9 390x in lane 1 was rising on the fast track to 100c

but thank to you I can start to finish setting the pc up and hopefully later on I can start oc it

oh spec Gigabyte 990fxa-ud3 rev4.0/9590 2x 390x/ax1200/ 32gb dominator platinum/c drive is HyperX Predator 240GB /games on sm951 ^^

reeven

  • 40
  • 1
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #57 on: July 18, 2016, 03:51:18 pm »
I hate gigicrap bios, but jorgecorazondeleon work is AWSOME.
v6 bios work perfect on my 4.0.

Thank you so much. After ZEN appear i will give this board and fx8350 to my nephew.

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #58 on: July 18, 2016, 06:59:23 pm »
I hate gigicrap bios, but jorgecorazondeleon work is AWSOME.
v6 bios work perfect on my 4.0.

Thank you so much. After ZEN appear i will give this board and fx8350 to my nephew.

The real merit (and idea) is of REGIT

AgentFXA

  • 372
  • 16
    • none
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #59 on: July 19, 2016, 07:07:57 am »
Hmm, I did not see a single problem with any of the bios updates here but same mobo does not mean it's same hardware overall.
X470 Aorus Gaming / Ryzen 2700x / GV-RX570AORUS-4GD / 16 GB HyperX Predator 3200  / SeaSonic 650W / Tt View 71 TG / Win10x64