Official GIGABYTE Forum

Bios settings... X99 UD3P

Bios settings... X99 UD3P
« on: January 31, 2016, 10:50:16 am »
Hello. I'm new to the uefi bios and was wondering if someone could tell me the best settings for my x99 ud3p motherboard. I don't overclock, raid... pretty boring ... i know. cpu is 5820k, 16gig DDR4 3000 (PC4 24000) , 970 evga gpu. Any info would be greatly appreciated.

Thanks.
« Last Edit: January 31, 2016, 10:57:34 am by Coreman »

dmdilks

  • 3093
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Bios settings... X99 UD3P
« Reply #1 on: February 01, 2016, 02:22:52 am »
You really should only have to set the SSD device to AHCI and stay with the memory your CPU will support 2133. Now what OS are you going to run. If you want to run windows 7 just put the disk in your drive.

Go into bios set it to boot to the UEFI DVD drive. Now if you booting from a USB do the basically the same thing. Plug in the USB drive go into the bios & boot from the UEFI USB drive.

Now if you want to install windows 8 or 10 change it from other OS to windows 8 /10. Plus do the same thing with the drives you would do with windows 7.
« Last Edit: February 01, 2016, 02:23:42 am by dmdilks »
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: Bios settings... X99 UD3P
« Reply #2 on: February 01, 2016, 09:33:53 am »
Thank you for your reply.... I am running windows 10 and will change setting. Once again Thank you.