Official GIGABYTE Forum

MA790X-UD4 stops at verifying dmi pool data

MA790X-UD4 stops at verifying dmi pool data
« on: March 13, 2009, 10:59:28 am »
I built the system 3 days ago, everything went well, no problems during
assembly, it booted right up and I installed the OS. The next day I
installed various software programs, went online, all was working well. Then
it wouldn't load Windows after I hit "restart", and I can't
figure out what the problem is. I get this message:
'Verifying DMI Pool Data............
"WARNING: EES is turned off !! Please use EES application to turn it on
again. Press any key to continue'"

 Also, when I hit F12 to go into boot screen the computer
 freezes up and I have to use the power button to turn off the pc.





Nothing happens when I press a key. I cleared CMOS, loaded fail-safe
defaults in BIOS, that didn't help. I took out the RAM and reinstalled it as
per Gigabyte tech support suggestion, it didn't help. The same error
message appears without any drives attached, after I disconnected the hard
drive and dvd drive.






Here are the components:



GIGABYTE GA-MA790X-UD4 AM2+/AM2 AMD 790X ATX AMD Motherboard


SPARKLE SFPX95GT1024U2H GeForce 9500 GT 1GB 128-bit GDDR2 PCI
Express 2.0 x16 HDCP Ready SLI Supported Video Card


AMD Phenom II X4 940 Deneb 3.0GHz Socket AM2+ 125W Quad-Core Black
Edition Processor Model


G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual
Channel Kit Desktop Memory Model F2-8500CL5D-4GBPK


Antec Nine Hundred Black Steel ATX Mid Tower Computer Case



SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI
Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply -


LITE-ON 22X DVD Burner with LightScribe Black SATA



Western Digital Caviar SE16 WD5000AAKS

Windows XP Professional 64 bit



 
-----------

--
 
Johnny Asia, Guitarist from the Future


http://johnnyasia.com

Badbonji

  • 356
  • 13
Re: MA790X-UD4 stops at verifying dmi pool data
« Reply #1 on: March 13, 2009, 10:36:11 pm »
Try resetting the BIOS to defaults and also reset the CMOS (Using jumper or removing the battery on the motherboard for a good few minutes should do it) then post back with results.

Hope this helps.
Core i7 965 @ 4.35Ghz 1.37Vcore
6Gb G.Skill 1600Mhz DDR3 @ 1740Mhz 8-8-8-20 1T
HIS HD5970 @ 800/1100
Gigabyte Extreme X58
X-Fi Xtreme Gamer Fatal1ty
256GB M4 + 150GB Raptor
EK Supreme HF/GTX480/MCP655/EK Res :D

Badbonji

  • 356
  • 13
Re: MA790X-UD4 stops at verifying dmi pool data
« Reply #2 on: March 13, 2009, 10:41:20 pm »
Also, do you mean DES? It stands for Dynamic Energy Saver. When it asks you to press any key, do that and try to boot into windows. Then, make sure all your drivers for the motherboard are installed that you need and load up the Dynamic Energy Saver Programme which should be on the CD. Then there shouls be a large oval button which turns it on. Try this first :P before last post.
Core i7 965 @ 4.35Ghz 1.37Vcore
6Gb G.Skill 1600Mhz DDR3 @ 1740Mhz 8-8-8-20 1T
HIS HD5970 @ 800/1100
Gigabyte Extreme X58
X-Fi Xtreme Gamer Fatal1ty
256GB M4 + 150GB Raptor
EK Supreme HF/GTX480/MCP655/EK Res :D

Re: MA790X-UD4 stops at verifying dmi pool data
« Reply #3 on: March 14, 2009, 11:38:06 am »
Also, do you mean DES? It stands for Dynamic Energy Saver. When it asks you to press any key, do that and try to boot into windows.


It says  EES, not DES
Nothing happens when I press any key.

Re: MA790X-UD4 stops at verifying dmi pool data
« Reply #4 on: March 14, 2009, 11:41:07 am »
Try resetting the BIOS to defaults and also reset the CMOS (Using jumper or removing the battery on the motherboard for a good few minutes should do it) then post back with results.

Hope this helps.

I tried that, it didn't help.  I sent the board back to newegg.com.


I found someone else with the same problem:

http://www.techsupportforum.com/microsoft-support/windows-vista-support/351911-post-error-preventing-boot-up.html

 

anything