Z170-HD3P instal win 10 to m.2 sata ssd

[martin.petr]

Hello,

I have a problem with installing win10 pro_64 to disk intel m.2 SSDSCKW240A4.
After installing falls into the BSoD.

I tried to replace the SSD driver, Motherboard, 2x CPU's (i7-7700 and i3-6100), RAM, downgrade to F5.

only way instalation in use http://www.delock.com/produkte/G_62552/merkmale.html?setLanguage=cz
and connect to the SATA 0

using i3-6100 and bios F5 win10 install and use, however, can only sysprep, if you want to establish an account (Express Setup), your computer produces a couple of restarts and give me an offer to repair the system

You have any ideas?

[shadowsports]

Please reset your BIOS to defaults.  Connect the drive to SATA3_1~5..  Do not connect to port 0.  Set the Operate Mode of the controller to AHCI.  Your Intel 530 SSD is compatible with the system, without using an adapter.

With correct settings and connections, your SSD will appear in BIOS under Peripherals SATA3_1~5 depending on the port you've chosen.  If it doesn't, solve this issue first.

Let us know if you run into any snags.     

[martin.petr]

in bios driver SSD is seen as SATA0, but unfortunately when installing WIN 10 PRO
constantly falls into the BSoD.

I finally tried F20c bios and the system is stable

In my bios bug is when the connection between the CPU and M2.

You know when the new bios?