GA-H110M-S2H - Setting up the primary video signal/port in the BIOS

[buconova]

Hello folks


I have a problem as follows.

Is it possible to determine at this motherboard primary port for video signal?

On the VGA port I connected the projector (TV) - Secondary ScreenIn a DVI port, I have connected the monitor - the primary screen.

The problem is multi boot loader because the signal only to the VGA port. The picture is on the secondary display (VGA), which is wrong. I want a picture on the primary display (DVI).

Obviously the default primary VGA port. I would like and need to be the primary DVI port. Do this in the BIOS to set it manually?

Thanks for any help

Me and Uncle Google apologizes for translation, although I believe that we are doing well

[shadowsports]

Board supports up to 2 displays only using onboard video.

BIOS > Peripherals > Initial Display Output > IGFX

Chipset > Internal Graphics > (Use either) Auto or Enabled

Sadly, there is no way to specify primary display.  VGA will ALWAYS be primary if a monitor is connected to the D-SUB port.

[buconova]

Thank you.

Although I am not satisfied with the reply

I silently hoped to be able to define the primary DVI port.

In the meantime, the previous Asus H81 I had the same display is connected, there is a DVI primary.

Weird. It will have to be back to Asus.

Nothing. Thank you and goodbye