Official GIGABYTE Forum

ma790fxta-ud5 f3f bios and 1090t

ma790fxta-ud5 f3f bios and 1090t
« on: May 09, 2010, 06:26:33 am »
Hi looking for clarification on the new beta bios f3f. After installing my new x6 1090t into my rig I noticed that the default vid was 1.475. This should be 1.35.

I am running the Beta Bios for this chip and so think its a BIOS problems but cant be sure. I have OC'ed the new 1090t to 20 multi@4.0 mhz. runs like a dream but the following tools display the following VID's

BIOS lowered from 1.474 norla to 1.425
AOD = 1.475
CPUz = 1.425
everest = 1.17 - 1.42
CPUID = fluctuates between 1.18 and 1.42

The other problem I have is that VID fluctuates up and down. I have deactivated everything in the BIOS, boost, CNQ, C state u name it but the VID still fluctuates up and down.

yes I know its beta but come on I have this new chip and its not upto scratch due to bios issues. IS IT BIOS?
RIG: Silverstone FT01 | MOBO: MA790FXTA-UD5 |  CPU: PHENOM II X6 1090t@4.0| RAM: 8GB GSKILL DDR3@1600 | GPU: 2 X 5850CF | COOLER: TRUE PUSH/PULL| PSU: 650W ThermaltakeEvo Blue| OS: W7 Ultimate x64 | MONITOR: 2XLG 23" FULL HD


  • 1553
  • 35
Re: ma790fxta-ud5 f3f bios and 1090t
« Reply #1 on: May 10, 2010, 02:25:46 am »
Id say it was the bios is almost the same problem im having with the ga890fx-ud5. With cpuid i read 3200 speed with aod and in bios says 3500. My voltage says 1.4750.   Cant turn off the C1 support even set to disabled it still goes to 800.
GA-Z170X-UD5,Core i5-6600K,16 GIG,3200 ram ,2 X Corsair 240GB SATA III SSD, 500 gig HD,7 ult 64\, Rx-480 8gig\

Z97X-SOC GIGABYTE, I5 4670k, 16 gig 1600 ram, 240 gig sata3 SSD,1x 500HD/ R9 280x, corsair 650 RM PSU

GA-Z97X-Gaming G1,850 corsair,,DDR4 3200,240SSd,6950 video,850EVA