Official GIGABYTE Forum

RAM Overclock Gaming K7

RAM Overclock Gaming K7
« on: July 17, 2017, 12:09:23 pm »
Hello everybody, I have build a 1700x, gaming k7 and 16gbGskillRGB3600CL16 and I overclock only my ram. But I'm a newbie in this matter and the last time I overclock something was a 3930k. I think I manage to put my ram on 3200mhz it this settings but I'm not sure if they are all safe and I would like the help of community in this matter. I leave my bios settings below!
PS: I don't know why I cant screenshot my bios, it says legacy usb not detected :S











Thankfully,
Cristiano Costa
« Last Edit: July 17, 2017, 12:16:27 pm by chriscostax »
Ryzen 1700X
Gigabyte Gaming K7
16GB DDR4 3600CL16
Aorus 1080TI
Samsung EVO 256 + 1TB WD Black
Seasonic 850W
Kraken X62

absic

  • *
  • 5815
  • 529
  • Never give up; Never surrender!
    • Bandcamp
Re: RAM Overclock Gaming K7
« Reply #1 on: July 17, 2017, 05:26:38 pm »
Hi Cristiano,

looking through the screenshots, it looks as if everything is fine.

I have this motherboard, but with an 1800X CPU and I was able to set my RAM speed using XMP Profile. Were you unable to do this with your RAM kit?

When it comes to capturing BIOS screenshots, make sure that you have not disabled the USB ports in the BIOS. This can happen if you have set fast or ultra fast BOOT as certain items are disabled until the Operating System loads to speed up this process. Also, make sure that your USB pendrive is plugged into one of the USB ports on the back panel of the motherboard, rather than via a USB socket running off of one of the motherboard headers. The pendrive needs to be formatted as FAT32 and, if everything is recognised OK in BIOS, pressing the F12 key will capture the screen and save it to the pendrive.
Remember, when all else fails a cup of tea and a good swear will often help! It won't solve the problem but it will make you feel better.

Re: RAM Overclock Gaming K7
« Reply #2 on: July 18, 2017, 06:59:03 pm »
THank you for the answer, i will try to change those settigns on bios to make sure i can screenshot the bios.
The XMP profile when is enable my pc just dont boot, like rebooting every 5 secs... do i need to change voltages with xmp enable?
« Last Edit: July 18, 2017, 07:04:02 pm by chriscostax »
Ryzen 1700X
Gigabyte Gaming K7
16GB DDR4 3600CL16
Aorus 1080TI
Samsung EVO 256 + 1TB WD Black
Seasonic 850W
Kraken X62

absic

  • *
  • 5815
  • 529
  • Never give up; Never surrender!
    • Bandcamp
Re: RAM Overclock Gaming K7
« Reply #3 on: July 18, 2017, 07:10:36 pm »
With XMP enabled, all the settings for the RAM should be set correctly by default so you shouldn't have to change anything else.

What BIOS version is your motherboard running?
Remember, when all else fails a cup of tea and a good swear will often help! It won't solve the problem but it will make you feel better.

Re: RAM Overclock Gaming K7
« Reply #4 on: July 18, 2017, 08:12:41 pm »
The last one available F4, and i just check , the xmp profile 1 actually puts 3200mhz default.
Ryzen 1700X
Gigabyte Gaming K7
16GB DDR4 3600CL16
Aorus 1080TI
Samsung EVO 256 + 1TB WD Black
Seasonic 850W
Kraken X62