GA-EP45-UD3L + OCZ DDR2 800 + KINGSTON DDR2 667 = frequency is only 533MHz.

[blacklynx]

Personally, I'm having trouble configuring my memories on the motherboard. As you can see, I have a 2x2GB kit ocz xtc platinum OCZ2P8002G, they usually operate at 800MHz. Just want to add more than two sticks of 1GB, 6GB total, only this kit 2x1GB 667MHz and the memories are there the problems begin because the mother board to stabilize the system, raises the frequency of 533MHz with timings of 5-4-4-15. I want to overclock this 2x1GB kit, to make it to 800MHz. It is precisely this point that is my problem, because what options I need to change the bios of this motherboard? My goal is to let all the guards running at 800MHz with timings of 5-5-5-15 at 1.8 / v. 1.9 Thank you for your attention.

[Aussie Allan]

Blacklynx
 You could spend a month of Sundays trying to make this work..... for starters, the board will run the memory off the slowest memory installed

 Second mixing memory manufactures and speeds of modules is just asking for trouble, ... this is why you can buy matched sets now for single,dual and even triple channel supported platforms.

 if you really want to go down this path , the best you MIGHT be able to get running stable is 533 with loose timings, to get better then this will mean a LOT of testing as to what works or doesn't

 Aussie Allan

[Dark Mantis]

Agreed! If you have enough time and patience, and deep pockets, you can possibly get the board and memory to play ball but in my estimation isn't worth the agro.