Official GIGABYTE Forum

gigabyte H270-HD3-CF slow boot

I7user

  • 3
  • 0
gigabyte H270-HD3-CF slow boot
« on: December 13, 2017, 10:59:40 pm »
Hi i have a H270-HD3-CF, updated bios etc. but my problem is, is why would this motherboard boot so slow for, it's like it's looking for a hdd to boot from.. then 11 seconds later finds one..... i have a scandisk ssd 240gig and a 2tb standard sata storage device.
i have uploaded a video of it booting to youtube, as you can see just what is going on... i have anchi enabled disabled every thing i can think of. so it either it boots or not boot.driving me batty.. any one can point me in the right direction  on how to fix it please?
https://www.youtube.com/watch?v=X31QjM34EDE

shadowsports

  • 2243
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: gigabyte H270-HD3-CF slow boot
« Reply #1 on: December 15, 2017, 12:38:55 pm »
Greetings,
Please provide us with your complete system specs, brand and model of ALL attached hardware.  Please disconnect the 2TB data drive and test if your start up time improves. 

If so, Load set up defaults in BIOS, press F10 to save.  Allow the system to start, then shut down.  Now perform a cold boot and note the start up time, result?

Will wait for your responses.

Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

I7user

  • 3
  • 0
Re: gigabyte H270-HD3-CF slow boot
« Reply #2 on: December 16, 2017, 11:18:21 am »
H270-HD3-CF mobo with


      Operating System
         Windows 10 Pro 64-bit
      CPU
         Intel Core i7 6700 @ 3.40GHz   30 °C
         Skylake 14nm Technology
      RAM
         16.0GB Dual-Channel Unknown @ 1066MHz (14-14-14-35)
      Motherboard
         Gigabyte Technology Co. Ltd. H270-HD3-CF (U3E1)   33 °C
      Graphics
         S24F350 (1920x1080@60Hz)
         4095MB NVIDIA GeForce GTX 1080 (EVGA)   40 °C
      Storage
         1863GB Western Digital WDC WD20EZRZ-00Z5HB0 (SATA)   35 °C
         223GB SanDisk SDSSDA240G (SSD)   32 °C
      Optical Drives
         No optical disk drives detected
      Audio
         Realtek High Definition Audio

NO CD ROM home built in a inwin 303 case just have a mouse and keyboard attached. nothing else

 took off the 2tb hdd and same thing. 11sec boot...

shadowsports

  • 2243
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: gigabyte H270-HD3-CF slow boot
« Reply #3 on: December 16, 2017, 02:11:28 pm »
Greetings,
All specs means PSU as well.  Did you load set up defaults?  And test boot times?

16.0GB Dual-Channel Unknown @ 1066MHz (14-14-14-35) Motherboard - What tool did you use to measure CLK speed.  Your 7th gen processor supports XMP, but the reported value doesn't look correct unless this is one channel 1066 x 2 - 2132Mhz?  Is your memory on the QVL for the board?  Do you see XMP support in BIOS?  This should be enabled.

Slow boot time can have more than one cause.  Connected devices, USB (besides mouse and keyboard), hubs, other storage devices, etc.

Was this a fresh install of W10, an upgrade from a previous OS, or swap from another motherboard?  If this was not a fresh install of the OS, something left over can cause the delay.

The next things to look at are settings for option ROMs.  If these are set to enabled, they can cause delays while the system bus us scanned.  Formatting GPT or MBR won't affect boot times.  UEFI should be used when possible, Disable Legacy support if you are not using option ROMs.  With UEFI, you must also specify the UEFI "prefixed' install option for the OS during install.  Graphics driver is another possible source of boot delays.  Hopefully something here will help you to pinpoint the issue. 



« Last Edit: December 16, 2017, 02:20:07 pm by shadowsports »
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

I7user

  • 3
  • 0
Re: gigabyte H270-HD3-CF slow boot
« Reply #4 on: December 16, 2017, 06:24:36 pm »
Greetings,
All specs means PSU as well.  Did you load set up defaults?  And test boot times?

16.0GB Dual-Channel Unknown @ 1066MHz (14-14-14-35) Motherboard - What tool did you use to measure CLK speed.  Your 7th gen processor supports XMP, but the reported value doesn't look correct unless this is one channel 1066 x 2 - 2132Mhz?  Is your memory on the QVL for the board?  Do you see XMP support in BIOS?  This should be enabled.

Slow boot time can have more than one cause.  Connected devices, USB (besides mouse and keyboard), hubs, other storage devices, etc.

Was this a fresh install of W10, an upgrade from a previous OS, or swap from another motherboard?  If this was not a fresh install of the OS, something left over can cause the delay.

The next things to look at are settings for option ROMs.  If these are set to enabled, they can cause delays while the system bus us scanned.  Formatting GPT or MBR won't affect boot times.  UEFI should be used when possible, Disable Legacy support if you are not using option ROMs.  With UEFI, you must also specify the UEFI "prefixed' install option for the OS during install.  Graphics driver is another possible source of boot delays.  Hopefully something here will help you to pinpoint the issue.

ok i forgot to say that i had a Matx mobo installed prev, and that booted up in 4 seconds easy as, so its not the psu as thats standard 750 w or hdd's or keyboards. as far as i know... yes i do have xmp enabled memory is hyper fury 2133 , yes fresh install win 10 , defaults are the same still 11 second boot time,  one thing that does bother me is that the mobo VGA diag light stays lit.until the system boots into windows then stays unlit...

shadowsports

  • 2243
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: gigabyte H270-HD3-CF slow boot
« Reply #5 on: December 22, 2017, 09:25:11 pm »
Greetings,
4 sec boot is pretty impressive (unbelievable).  This must have been from sleep / hibernate.  My RAID 0 takes about 12 sec cold boot to desktop.  I can't see SanDisk outperforming 850 Pro's but anything is possible. My system wakes in about 1.5 sec...  tap spacebar and its up before I can sit down. 
 
Have you disabled all Legacy options?  Did you use the UEFI prefixed install option for W10?  I suspect it has to to with the way windows was installed.     

« Last Edit: December 22, 2017, 09:38:35 pm by shadowsports »
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW