Official GIGABYTE Forum

Z77-UD5H and Windows 10

Z77-UD5H and Windows 10
« on: January 20, 2018, 04:17:46 pm »
Hello,

Having just read that older motherboards than the one above are running Windows 10, is it possible for the Z77-UD5H to do so as well?


Teknology_9

shadowsports

  • 2244
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Z77-UD5H and Windows 10
« Reply #1 on: January 20, 2018, 08:01:57 pm »
Greetings,
Yes, both rev's 1.0, 1.1 support W10.

https://www.gigabyte.com/Motherboard/GA-Z77X-UD5H-rev-10#support-dl
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

dmdilks

  • 3080
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Z77-UD5H and Windows 10
« Reply #2 on: January 21, 2018, 02:20:39 am »
Windows 10 will run on about almost any thing.

Processor: 1 gigahertz (GHz) or faster.
RAM: 1 gigabyte (GB) (32-bit) or 2 GB (64-bit)
Free hard disk space: 16 GB.
Graphics card: Microsoft DirectX 9 graphics device with WDDM driver
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: Z77-UD5H and Windows 10
« Reply #3 on: January 21, 2018, 11:58:41 am »
Hello,

Thanks for the replies. I can see that there is no integrated graphics driver, but where do I obtain the USB driver?

Teknology_9

dmdilks

  • 3080
  • 43
  • "If it isn't broke don't fix it"
    • http://dmdcomputerservice.webs.com/
Re: Z77-UD5H and Windows 10
« Reply #4 on: January 21, 2018, 01:58:21 pm »
Windows 10 should load it. If it isn't done just go into device manager. Click on any of the ones that are not done and tell ii to search for the driver. I have install windows 10 many computers and never really had a problem.
« Last Edit: January 21, 2018, 01:59:59 pm by dmdilks »
X299X Aorus Master, i9-9940x-3.30Ghz, 64gb G-Skill DDR4-2400, MSI RTX-3070 8GB, Cooler Master case, Thermal-take PSU 850w, 1-M2-NMVe SSD-512gb, 3-Pny 1TB SSD, 2-WD Raptors 1TB, Win 10 pro 64bit, Asus 35" 144Mhz Monitor.

Re: Z77-UD5H and Windows 10
« Reply #5 on: January 21, 2018, 04:26:15 pm »
Thanks for the reply dmdilks.

Teknology_9

shadowsports

  • 2244
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Z77-UD5H and Windows 10
« Reply #6 on: January 22, 2018, 02:16:50 am »
One other suggestion.  Don't load the LucidLogix VIRTU MVP.  Not needed in 10.  It was written specifically for W7/8
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

Re: Z77-UD5H and Windows 10
« Reply #7 on: January 23, 2018, 08:05:42 pm »
Thanks Shadowsports for the information, but I don't use that software application.


Teknology_9