Official GIGABYTE Forum

GA-990XA-UD3 rev.3.0 Custom update


  • 1
  • 1
GA-990XA-UD3 rev.3.0 Custom update
« on: April 19, 2018, 04:04:59 pm »
First of all let me thank professor_jonny  and his thread about GA 990FXA UD3 rev 3 custom modified bios update. Because of this thread I learned that there are simple tools to update your BIOS modules without waiting the manufacturer to update them (possibly never).

Be carefull this is for the 990XA not 990FXA. (I made that mistake with professor_johnny thread and his FXA BIOS luckily my mobo protected itself from a bad flash.

So here is the link with the FEh version of BIOS updated with all the latest modules (renamed to FEi). Tested and works perfectly until now.
I added 1 more custom BIOS with additional NVMe modules (named FEj). Haven't tested it yet but I will today or tomorrow. If you feel courageous you can do it yourself
« Last Edit: April 19, 2018, 04:08:41 pm by Kamui »

Re: GA-990XA-UD3 rev.3.0 Custom update
« Reply #1 on: May 02, 2018, 11:48:23 pm »
hi,i am a chinese user of this 990xaud3(3.0).would you please send your custom update bios through the email for me?because the china's govenment internet firewalls blocks us chinese people from so many foriegn webs which includes the
here is my thanks a lot!!!

Re: GA-990XA-UD3 rev.3.0 Custom update
« Reply #2 on: May 26, 2018, 07:59:17 pm »
Hey, i installed the FEi, and it didn't change anything. i tried from @bios, and Q-Flash but after both it still stays FEh.
any idea why?

Re: GA-990XA-UD3 rev.3.0 Custom update
« Reply #3 on: June 07, 2018, 05:00:28 am »
Hi Kamui:

First of all: thanks for the work.
I installed your " FEi " and shows same date & version than the official FEh. Didn't made previous disks benchmarks with old bios so I can't know if there are improves in the modules or not.

Did you (or someone else) tested your FEi NVMe BIOS? (would be cool to have this in our board).

Would be possible to mod this bios for support 2400 MHz modules (xmp 2.0)? My board can only reach 2160MHz.
« Last Edit: June 07, 2018, 05:02:42 am by ufo_shapes »