Official GIGABYTE Forum

Is it a UDIMM 1Rx8/2Rx8/1Rx16 memory module?

Is it a UDIMM 1Rx8/2Rx8/1Rx16 memory module?
« on: June 14, 2019, 01:36:53 pm »
http://download.gigabyte.eu/FileList/Manual/mb_manual_ga-h110m-ds2(ddr3)_e.pdf
In the above manual, under "1-2 Product Specifications", it says "Support for non-ECC UDIMM 1Rx8/2Rx8/1Rx16 memory modules".
http://www.adata.com/us/feature/426
On the above product page, the "Description" and "Specifications" say nothing about "1Rx8/2Rx8/1Rx16". Should I assume it is 1Rx8/2Rx8/1Rx16? How can a user make sure that a UDIMM is compatible with the motherboard before purchase?

I contacted ADATA Customer Service Center and got the following reply:
"Compatibility issues that need you to confirm with motherboard manufacturers."
« Last Edit: June 14, 2019, 01:39:11 pm by Matthew Wai »

shadowsports

  • 2243
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Is it a UDIMM 1Rx8/2Rx8/1Rx16 memory module?
« Reply #1 on: June 14, 2019, 03:27:14 pm »
I don't think that memory is certified compatible.

http://download.gigabyte.us/FileList/Memory/mb_memory_ga-h110m-ds2.pdf - QVL for your board

https://www.adata.com/us/orderinfo/426 - then click "Ordering Info" tab
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

Re: Is it a UDIMM 1Rx8/2Rx8/1Rx16 memory module?
« Reply #2 on: June 19, 2019, 09:40:48 am »
Do you mean I should buy only the ones listed in the PDF mentioned in your post?

shadowsports

  • 2243
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Is it a UDIMM 1Rx8/2Rx8/1Rx16 memory module?
« Reply #3 on: June 20, 2019, 02:59:43 pm »
Do you mean I should buy only the ones listed in the PDF mentioned in your post?

Whenever possible, yes.  The ones which appear in a different color have been tested and are certified compatible by Gigabyte.  Some of their boards are very finnicky.  Nothing's worse than getting your build together only to find that it won't POST, boot or run reliably because of a memory choice.  Using QVL RAM just increases your probability of success.   
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW