Official GIGABYTE Forum

blinking led

tabs78

  • 4
  • 0
blinking led
« on: April 17, 2020, 01:02:55 pm »
hi, sorry for my english.
i have a mb b450m aorus
crucial balistic sport 3000 8x2
ssd crucial mx500 240gb
xfx rx570
psu kolink modular 500w
ryzen 1600af

when i leave it some time (about 2h) without touch it crashes.
no signal comes to monitor.
i see on motherboard the led (ram/cpu/vga etc) bliking alternaty.

i disabled ibernate a suspend mode

i have last drives and bios

shadowsports

  • 2038
  • 63
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: blinking led
« Reply #1 on: April 18, 2020, 08:20:59 pm »
hi, sorry for my english.
i have a mb b450m aorus
crucial balistic sport 3000 8x2
ssd crucial mx500 240gb
xfx rx570
psu kolink modular 500w
ryzen 1600af

when i leave it some time (about 2h) without touch it crashes.
no signal comes to monitor.
i see on motherboard the led (ram/cpu/vga etc) bliking alternaty.

i disabled ibernate a suspend mode

i have last drives and bios

Greetings,
Places to start.

Is this a new system?
What OS?
Did you perform a fresh install or migrate the install from another build?
Are you over clocking?

Is your RAM on the QVL for your board?
Have you mem-tested the RAM
Is there a firmware update for  your mx500?
https://www.crucial.com/support/ssd-support/mx500-support

Try and earlier or later version of your video driver
https://www.amd.com/en/support
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 2080 FTW3 Ultra, 960 Pro_m.2, W10 2004
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W10 2004
Z97X-UD5H \850w, 4790K, 16GB Vengeance, GTX 970 FTW SC, RAID0

AgentFXA

  • 377
  • 17
    • none
Re: blinking led
« Reply #2 on: April 19, 2020, 04:29:42 am »
blinking red means pwr stability issues

your Kolink is a real 444W psu (not 500w)  and that can be a problem depending on its component quality
« Last Edit: April 19, 2020, 04:31:47 am by AgentFXA »
X470 Aorus Gaming / Ryzen 2700x / GV-RX570AORUS-4GD / 16 GB HyperX Predator 3200  / SeaSonic 650W / Tt View 71 TG / Win10x64

tabs78

  • 4
  • 0
Re: blinking led
« Reply #3 on: April 20, 2020, 07:43:55 am »
hi, sorry for my english.
i have a mb b450m aorus
crucial balistic sport 3000 8x2
ssd crucial mx500 240gb
xfx rx570
psu kolink modular 500w
ryzen 1600af

when i leave it some time (about 2h) without touch it crashes.
no signal comes to monitor.
i see on motherboard the led (ram/cpu/vga etc) bliking alternaty.

i disabled ibernate a suspend mode

i have last drives and bios

Greetings,
Places to start.

Is this a new system? yes
What OS? Win 10pro 64bit
Did you perform a fresh install or migrate the install from another build? fresh
Are you over clocking?  i set IPM

Is your RAM on the QVL for your board? NO
Have you mem-tested the RAM? yes it passed
Is there a firmware update for  your mx500? yes
https://www.crucial.com/support/ssd-support/mx500-support

Try and earlier or later version of your video driver
https://www.amd.com/en/support  yes

tabs78

  • 4
  • 0
Re: blinking led
« Reply #4 on: April 20, 2020, 09:41:32 am »
blinking red means pwr stability issues

your Kolink is a real 444W psu (not 500w)  and that can be a problem depending on its component quality

it shoud have good components, i read that

https://www.youtube.com/watch?v=NrSPnGulSEs&feature=youtu.be&fbclid=IwAR2JqCFMxGSr-8s8ltj8jS7tJ6kiuPe_xaQH02_OHvk8a8pHAnGwXXCa2Ok
« Last Edit: April 20, 2020, 09:47:18 am by tabs78 »

AgentFXA

  • 377
  • 17
    • none
Re: blinking led
« Reply #5 on: April 20, 2020, 10:37:07 am »
provided there is absolutely nothing oc'ed and all @default/auto settings in bios? disable IPM - tested this?

CPU/GPU load temperatures are all in range?

if still problems try another PSU and see how it goes...
X470 Aorus Gaming / Ryzen 2700x / GV-RX570AORUS-4GD / 16 GB HyperX Predator 3200  / SeaSonic 650W / Tt View 71 TG / Win10x64

tabs78

  • 4
  • 0
Re: blinking led
« Reply #6 on: April 20, 2020, 11:04:24 am »
provided there is absolutely nothing oc'ed and all @default/auto settings in bios? disable IPM - tested this?

CPU/GPU load temperatures are all in range?

if still problems try another PSU and see how it goes...

ok.

temperture:
-the problem appear when i don't make nothing.
however the temp in game for example are 61/67 for cpu and 78 for gpu