Official GIGABYTE Forum

GA-MA770-DS3

andyss

  • 2
  • 0
GA-MA770-DS3
« on: April 19, 2020, 09:30:10 am »
Hi,

I've been given a GA-MA770-DS3 motherboard (looks like its fitted with an AMD processor looking at the cooler).
Wanted to make it into a gaming PC so bought a Radeon RX570 GPU for it, which then required an upgrade of PSU so we chose the Gigabyte G750H.

Parts all put together, I get a beep code and no monitor output from the GPU and the motherboard has no on-board monitor port.

Removing the GPU I still get the same beep code. Tried resetting the Bios (by removing the battery) to no effect.

I'm having trouble understanding the beep code.
Sounds like its 3 beeps lasting approx 1 second followed by a double beep (2 beeps each lasting one second with maybe 100ms between them). Each of the beeps are about 3 seconds apart.
Do I interpret this as a graphics card error? Is that normal without a GPU installed?

shadowsports

  • 2060
  • 63
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: GA-MA770-DS3
« Reply #1 on: April 19, 2020, 04:37:17 pm »
Greetings,
3 beeps, if this is accurate is typically memory.
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 2080 FTW3 Ultra, 960 Pro_m.2, W10 2004
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W10 2004
Z97X-UD5H \850w, 4790K, 16GB Vengeance, GTX 970 FTW SC, RAID0

andyss

  • 2
  • 0
Re: GA-MA770-DS3
« Reply #2 on: April 19, 2020, 05:38:16 pm »
Greetings,
3 beeps, if this is accurate is typically memory.

Its 3 beeps lasting approx 1 second followed by a double beep then back to 3 beeps.