Official GIGABYTE Forum

Problems with upgrade


  • 173
  • 2
Re: Problems with upgrade
« Reply #15 on: October 11, 2020, 04:48:08 pm »
Hi It won't let me out of the bios and also the only m2 ssd that shows in the boot is the 1gb one there is no sign of the 500gb one. I was going to update the bios but I might just see if Scan (that is where I got it from in the UK) will forward it to Gigabyte or see if I can e-mail Gigabyte and see what they say.
« Last Edit: October 11, 2020, 05:16:34 pm by cookiebun »
Intel Core i7 8700K Unlocked Coffee Lake OEM CPU/Processor
AORUS Gaming 7 Intel Z370 (Socket 1151) DDR4 ATX Motherboard
Corsair 32GB ( 4x8) DDR4 Vengeance LPX 3000MHz Memory
Zotac NVIDIA GeForce RTX 2080 8GB AMP! Extreme Turing Graphics Card
Samsung 970 EVO PLUS 500GB M.2, Samsung 970 EVO Plus 1 TB


  • 2971
  • 40
  • "If it isn't broke don't fix it"
Re: Problems with upgrade
« Reply #16 on: October 11, 2020, 11:23:44 pm »
1. I would pull the CPU one more time. I check the socket again those pins have to be perfect if they off just a little. You still have problem. 

2. I would remover the M.2 drive and put in another drive and see what happens. The software you installed links itself to the bios. That might be the problem.

3. With today's MB I have see where if you have a problem with like a M.2 drive. It will always go to that drive no matter what other drives you have in it.

  Hi I installed the drivers and everything was okay 

At this Point Every OK

then I installed the utilities all from the mono disc but when I clicked the RGB app on the desktop it went to this screen and when I come out of it an reboot it goes to the desktop then back to this screen is there a problem. 

All your problems started after you install that software.
GIGABYTE-GA-Z490 Vision G, i5-10600K 4.10GHz, 16gb Mushkin DDR4-2133 - 12-12-12-35, MSI Radeon RX 5500 XT MECH OC 8GB, Cooler Master case, Thermaltake PSU 850w, 1-M2-NMVe SSD-512gb  Win 10 pro 64bit, 40" 4k TV