Official GIGABYTE Forum

Z590 UD AC No Boot. Possible ATX_12V Connectors Issue?

Z590 UD AC No Boot. Possible ATX_12V Connectors Issue?
« on: April 09, 2021, 11:01:31 am »
I can't get a z590 UD AC with 11600KF to boot. It stays on VGA Red LED.

Reading the manual there is some ambiguity as to what PSU is needed. I have a Be Quiet Pure Power Pro 600W. This PSU only has 1x P4+P4 connector. The Z590 manual does not state that you also need an extra 1x4 but also does not state that you do not need it:

12ATX1/2)  ATX_12V_2X2/ATX_12V_2X4/ATX (2x2, 2x4, 12V Power Connectors and 2x12 Main Power Connector
With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all devices are properly installed. The power connector possesses a foolproof design. Connect the power supply cable to the power connector in the correct orientation.The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected, the computer will not start.

To meet expansion requirements, it is recommended that a power supply that can withstand high power consumption be used (500W or greater). If a power supply is used that does not provide the required power, the result can lead to an unstable or unbootable system


It does not say:

* You need a PSU with 2x4 (standard) and extra 1x4
* It will not boot if you do not have the extra 1x4 - it only says it will not boot if you do not "connect the 12v power connector", however that does not say BOTH the 1x4 and the 2x4

So will this board work with a standard PSU with this configuration? Or do I need to get a PSU with the extra EPS power?

Specs
CPU: 15-11600KF
Motherboard: Gigabyte Z590 UD AC
Memory: 2x 8GB Crucial Ballistix BL8G36C16U4B.M8FE1
NVME: Samsung 980 Pro 500GB M.2 2280 PCI-e 4.0 x4 NVMe Solid State Drive
PSU: be quiet! Pure Power 11 600W 80 Plus Gold Power Supply
Cooling: Corsair H100X
GPU: R7 250X Vapor X 1Gb, HD5450 for testing

teknology9

  • 713
  • 31
Re: Z590 UD AC No Boot. Possible ATX_12V Connectors Issue?
« Reply #1 on: April 09, 2021, 04:10:37 pm »
Hi,
Click on the link below and read through the post of feedback given by some forum members.

https://forum.giga-byte.co.uk/index.php?topic=23352.0

Have you checked the seating of your CPU and for any bent socket pins?

Hope this helps,
teknology9
Windows 10 Home Edition
NZXT Phantom
Seasonic Platinum 1000w
Noctua NH-U12P SE2
Corsair 16GB 2666
Gigabyte B460M AORUS PRO
MSI GeForce GTX 1650 D6 Gaming X 4G
i5- 10400
Samsung 970 Evo Plus - 250GB
Samsung 830 SSD - 250GB
PC building.........it's no fun if it's easy!!!

teknology9

  • 713
  • 31
Re: Z590 UD AC No Boot. Possible ATX_12V Connectors Issue?
« Reply #2 on: April 09, 2021, 08:21:15 pm »
Hi,

Just to add, you might want to use a PSU calculator to see if if you have enough power for your system. See the link below:

https://www.bequiet.com/en/psucalculator

Hope this helps,

teknology9
Windows 10 Home Edition
NZXT Phantom
Seasonic Platinum 1000w
Noctua NH-U12P SE2
Corsair 16GB 2666
Gigabyte B460M AORUS PRO
MSI GeForce GTX 1650 D6 Gaming X 4G
i5- 10400
Samsung 970 Evo Plus - 250GB
Samsung 830 SSD - 250GB
PC building.........it's no fun if it's easy!!!

Re: Z590 UD AC No Boot. Possible ATX_12V Connectors Issue?
« Reply #3 on: April 09, 2021, 09:22:47 pm »
Yes I think there is a bent pin in there. I zoomed in with a camera and can see somethings not lined up like the others.

Is this returnable or will Gigabyte say I caused the fault and refuse a return?
« Last Edit: April 09, 2021, 09:49:09 pm by Frank Rizzo »

teknology9

  • 713
  • 31
Re: Z590 UD AC No Boot. Possible ATX_12V Connectors Issue?
« Reply #4 on: April 10, 2021, 10:59:34 am »
Hi,

You could contact Gigabyte and find out what you need to do, or find out whether your retailer can correct the situation for you.

Hope this helps,

teknology9
« Last Edit: April 10, 2021, 11:00:53 am by teknology9 »
Windows 10 Home Edition
NZXT Phantom
Seasonic Platinum 1000w
Noctua NH-U12P SE2
Corsair 16GB 2666
Gigabyte B460M AORUS PRO
MSI GeForce GTX 1650 D6 Gaming X 4G
i5- 10400
Samsung 970 Evo Plus - 250GB
Samsung 830 SSD - 250GB
PC building.........it's no fun if it's easy!!!

Re: Z590 UD AC No Boot. Possible ATX_12V Connectors Issue?
« Reply #5 on: April 10, 2021, 12:30:50 pm »
I have now tested this in a Z590 Gaming X and I get exactly the same fault. Red LED stuck on VGA, 5 short beeps. This seems to indicate the CPU is faulty.

teknology9

  • 713
  • 31
Re: Z590 UD AC No Boot. Possible ATX_12V Connectors Issue?
« Reply #6 on: April 10, 2021, 05:05:33 pm »
Hi,
Have a read of this forum post, see the link below:

https://www.pcspecialist.co.uk/forums/threads/5-beeps-on-startup-motherboard-red-light.67183/

teknology9
Windows 10 Home Edition
NZXT Phantom
Seasonic Platinum 1000w
Noctua NH-U12P SE2
Corsair 16GB 2666
Gigabyte B460M AORUS PRO
MSI GeForce GTX 1650 D6 Gaming X 4G
i5- 10400
Samsung 970 Evo Plus - 250GB
Samsung 830 SSD - 250GB
PC building.........it's no fun if it's easy!!!

Re: Z590 UD AC No Boot. Possible ATX_12V Connectors Issue?
« Reply #7 on: April 10, 2021, 07:22:09 pm »
Yes read that one. The point about the mobo not seeing a screen attached makes sense but it did not solve my issue. Tried different monitors, different cables Dport, HDMI, VGA

I have a new processor arriving tomorrow. It's one with IGPU. Hopefully that will work and give me some evidence of what was faulty.

Re: Z590 UD AC No Boot. Possible ATX_12V Connectors Issue?
« Reply #8 on: April 11, 2021, 06:18:09 pm »
The solution to fixing GFX cards causes failure to boot is to enable CSM in the BIOS. Of course if you have the non graphics version chip like I have then this is impossible. Gigabyte could have helped out here. They could detect the F series and over-ride the VGA red LED and allow access to the BIOS.