Official GIGABYTE Forum

X470 Aorus Ultra-No beeps after PSU upgrade

X470 Aorus Ultra-No beeps after PSU upgrade
« on: July 10, 2021, 08:23:47 am »
HI all, Just upgrade my PSU to a EVGA Bronze 600 form a 500.
Whilst the PC boots up OK it seems to fun OK, everything works, but somehow differently? There are no beeps, the shutdown is different, the Aorus emblem on the mobo used to flash. I doesn't seem right, but as I say it all works?
Thanks
Jim

shadowsports

  • 2200
  • 66
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: X470 Aorus Ultra-No beeps after PSU upgrade
« Reply #1 on: July 11, 2021, 12:11:09 pm »
Greetings,
Changing the PSU shouldn't change this behavior.

Review your BIOS settings. 
Check under BIOS > Full Screen Logo and also the Fast Boot Option.

FSL is enabled by default, Fast Boot / Ultra Fast Boot is not and frankly there is no need for it. 

Only other possible scenario might be if using onboard graphics in conjunction with the onboard HDMI port, but this too is unlikely. 

These are the only things I can think of that might effect Aorus logo display or beep during POST.

« Last Edit: July 11, 2021, 12:16:04 pm by shadowsports »
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W10 21H2
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W10 21H2
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW