Official GIGABYTE Forum

Is it possible to update bios F62d on to the Pinnacle ridge cpu

DigDeep

  • 46
  • 2
Is it possible to update bios F62d on to the Pinnacle ridge cpu
« on: October 23, 2021, 09:50:20 pm »
Is it possible to update bios F62d on to the Pinnacle ridge cpu or is it finale version Bios F4

https://www.gigabyte.com/Motherboard/B450M-DS3H-rev-1x/support#support-dl-bios
AMD RYZEN 2600 | GIGABYTE B450M DS3H | XFX Radeon RX 580 GTS Black Edition
Patriot VIPER 16GB DDR4 3000MHZ | Transcend M.2 PCIe 110S 512 GB
WDC 2 TB WD20EZRZ | Windows 11 Pro x64

shadowsports

  • 2200
  • 66
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Is it possible to update bios F62d on to the Pinnacle ridge cpu
« Reply #1 on: October 24, 2021, 01:21:07 am »
Is it possible to update bios F62d on to the Pinnacle ridge cpu or is it finale version Bios F4

https://www.gigabyte.com/Motherboard/B450M-DS3H-rev-1x/support#support-dl-bios

Greetings,
2600 requires F1 minimum.  All BIOS revisions beyond that either add support for newer CPU's or address compatibility / security issues. 

If you system is stable, there is no need to upgrade.   Some of the BIOS after F4 have specific requirements (chipset versions).  Several users reported issues upgrading from F32 > F40 and later.  If you are stable, I would think twice about updating just to be on the "latest" BIOS rev. which may not give any additional, support, features, compatibility or security enhancements.
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W10 21H2
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W10 21H2
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

DigDeep

  • 46
  • 2
Re: Is it possible to update bios F62d on to the Pinnacle ridge cpu
« Reply #2 on: October 24, 2021, 05:02:29 am »
Is it possible to update bios F62d on to the Pinnacle ridge cpu or is it finale version Bios F4

https://www.gigabyte.com/Motherboard/B450M-DS3H-rev-1x/support#support-dl-bios

Greetings,
2600 requires F1 minimum.  All BIOS revisions beyond that either add support for newer CPU's or address compatibility / security issues. 

If you system is stable, there is no need to upgrade.   Some of the BIOS after F4 have specific requirements (chipset versions).  Several users reported issues upgrading from F32 > F40 and later.  If you are stable, I would think twice about updating just to be on the "latest" BIOS rev. which may not give any additional, support, features, compatibility or security enhancements.

F4 is final for Pinnacle Ridge cpu. Higher versions enables FSB overclocking but are not compatible with Pinacle Ridge
AMD RYZEN 2600 | GIGABYTE B450M DS3H | XFX Radeon RX 580 GTS Black Edition
Patriot VIPER 16GB DDR4 3000MHZ | Transcend M.2 PCIe 110S 512 GB
WDC 2 TB WD20EZRZ | Windows 11 Pro x64