Official GIGABYTE Forum

Gigabyte 990fxa-ud3 rev4.0 custom bios

shadowsports

  • 2243
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #105 on: June 22, 2019, 05:50:42 pm »
Hello everyone,

Thanks for custom BIOS. Works fine to me.

Can anyone tell me what causes an Ultra ATA CRC Errors on SATA SSD Samsung 860 PRO?
I hoped that after this update, everything would be ok with a drive but on occasions that errors come back again. I replaced SATA cable, even connect to the different power cable.
My setting is AHCI mode, but I think about changing 'On Chip SATA Type' to 'RAID' and see what happens. Anyone had the same problems?

Greetings,
Maybe the drive has a formatting error, bad cells or a failing controller?
Maybe the custom BIOS you are running has a problem, error or compatibility issue.

Might changing the operate mode of the controller help, sure.  Maybe?

We can only speculate.  Where to start...  Test the drive, verify its health.  Does it behave similarly in another system?
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #106 on: June 24, 2019, 11:17:54 am »
Hello everyone,

Thanks for custom BIOS. Works fine to me.

Can anyone tell me what causes an Ultra ATA CRC Errors on SATA SSD Samsung 860 PRO?
I hoped that after this update, everything would be ok with a drive but on occasions that errors come back again. I replaced SATA cable, even connect to the different power cable.
My setting is AHCI mode, but I think about changing 'On Chip SATA Type' to 'RAID' and see what happens. Anyone had the same problems?

Greetings,
Maybe the drive has a formatting error, bad cells or a failing controller?
Maybe the custom BIOS you are running has a problem, error or compatibility issue.

Might changing the operate mode of the controller help, sure.  Maybe?

We can only speculate.  Where to start...  Test the drive, verify its health.  Does it behave similarly in another system?

The errors were even on F2 BIOS version. I did RMA and they replace the drive for a new one. Problems still remain. Other HDD drives haven't any errors for years.
I try to run a LiveCD Linux system and test a drive.
I read on Samsung forum the problem is compatibility Samsung 860 drive series with AMD Controllers and they recommend run on Intel Controllers.
I connect to laptop Dell E6400 and test the drive for one hour and there wasn't any new Ultra ATA Errors.

Anyone have Crucial MX500 experience on that mainboard? Is running fine?

p4nk

  • 1
  • 0
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #107 on: September 25, 2019, 06:45:34 pm »
Hello Regit,

Would you be so kind to make this modifications in the 990fxa-ud3 rev3.0 bios to have nvme boot?

Best regards,
P4nk

Allen8

  • 1
  • 0
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #108 on: November 01, 2019, 03:20:15 pm »
Hi
I made new bios to Gigabyte 990fxa-ud3 rev4.0
i don test because dont have motherboard ,but should work fine.
You can t kill motherboard because dual bios back backup bios if something get wrong.


It f4a witch some changes :
 OROM AMD RAID MISC 4392    - 3.2.1540.6      uppdated to 3.3.1540.19)
     OROM AMD RAID MISC 4393    - 3.3.1540.17      updated to 3.3.1540.19)
     EFI AMD RAID               - 1.0.0.45      updated to 1.0.0.49)
     EFI AMD Utility            - 1.0.0.45      updated to 1.0.0.49)
     OROM Realtek Boot Agent    - 2.60         updated to 2.64)
     EFI Realtek UNDI           - 2.027         updated to 2.035)
     EFI Broadcom UNDI          - 14.0.6      updated to 17.0.5)
     OROM Broadcom Boot Agent                   (new rom 16.8.0)

I wil add vishera fix in next version, and update amd agesa .
   




https://drive.google.com/folderview?id=0B4rC7reRUp6QeDRGRHlhWk5CdXc&usp=sharingg
Hi
will this custom bios work on GA-990FXA-UD3 (rev 3.0)?

AgentFXA

  • 379
  • 17
    • none
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #109 on: November 03, 2019, 03:09:16 am »
WoW, people still using this ancient chipset?
X570 Aorus Elite Wifi / Ryzen 2700x / Gigabyte Radeon RX 7900 XT Gaming OC 20G Graphics Card / 16 GB HyperX Predator 3200 / SeaSonic 850W / Tt View 71 TG / Win10x64

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #110 on: November 28, 2019, 08:04:56 am »

Hi
will this custom bios work on GA-990FXA-UD3 (rev 3.0)?

no it wont but this will:

it will boot nvme and is the latest un released FDN bios that I modded with the latest option roms and microcodes at the time.


https://forum.giga-byte.co.uk/index.php?topic=16626.0

phanton666

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #111 on: September 27, 2020, 07:04:53 pm »
not everyone has a bag of money for these things.  ;)

WoW, people still using this ancient chipset?

phanton666

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #112 on: September 27, 2020, 07:14:22 pm »
I updated this firmware with the proposed fixes, except the boot (broadcom boot agent 20.6.0), in which the UBU tool, apparently does not contain the version above.

Hi
I made new bios to Gigabyte 990fxa-ud3 rev4.0
i don test because dont have motherboard ,but should work fine.
You can t kill motherboard because dual bios back backup bios if something get wrong.

It f4a witch some changes :
 OROM AMD RAID MISC 4392    - 3.2.1540.6      uppdated to 3.3.1540.19)
     OROM AMD RAID MISC 4393    - 3.3.1540.17      updated to 3.3.1540.19)
     EFI AMD RAID               - 1.0.0.45      updated to 1.0.0.49)
     EFI AMD Utility            - 1.0.0.45      updated to 1.0.0.49)
     OROM Realtek Boot Agent    - 2.60         updated to 2.64)
     EFI Realtek UNDI           - 2.027         updated to 2.035)
     EFI Broadcom UNDI          - 14.0.6      updated to 17.0.5)
     OROM Broadcom Boot Agent                   (new rom 16.8.0)

I wil add vishera fix in next version, and update amd agesa .
   
.

https://drive.google.com/folderview?id=0B4rC7reRUp6QeDRGRHlhWk5CdXc&usp=sharingg

nagual

  • 1
  • 0
Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #113 on: December 24, 2020, 09:31:05 am »
Can you possibly create custom BIOSes for other Gigabyte mobos as well? Specifically, for the GA-970A-UD3P rev 1.0 in order to resolve GNU/Linux compatibility issues.

Thank you for your answer!

Yes
Download:
https://drive.google.com/open?id=0B4rC7reRUp6QWWxSYW9CTUF4alk
I will add AMD patches later in free time


Update v11
    - OROM LAN Realtek OROM 2.66
    - EFI LAN Broadcom UNDI EFI 20.2.0

download:
https://drive.google.com/open?id=0B4rC7reRUp6QZkdwSVZaX2k4a3M

Hello.
https://drive.google.com/drive/folders/0B4rC7reRUp6Qdnl2MUNfdEctaEk
990-xa-ud3 rev 1.0
unstable for me.

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #114 on: January 08, 2022, 03:42:47 pm »
that would be awesome :) thanksy

try this:

https://drive.google.com/open?id=0B4rC7reRUp6QLTVZdVBNRVBCZlE

Important:
The "BOOT" section of the UEFI BIOS and the shortcut to the "Bootable Devices" will not show the NVMe SSD, although it may be bootable!
After having installed the NVMe supporting OS in UEFI mode onto the PCIe/M.2 connected SSD, you will see the new bootable system drive listed as "Windows Boot Manager"
Write if work if no i will try something other.

Hi! I can't seem to access the drive. Can you help me, please?

Re: Gigabyte 990fxa-ud3 rev4.0 custom bios
« Reply #115 on: March 22, 2022, 12:56:01 pm »
I am so glad I found this custom bios to upgrade my 990FXA-UD3 Rev4.0 to support NVME boot for a Samsung 980EVO.  I downloaded the bios from the google drive and flashed it using @Bios utility from Gigabyte.  I installed the NVME using PCIE adapter and cloned my existing SATA SSD to the new NVME and change the boot order to pick the Windows Boot Manager for the NVME drive and it booted without any issue.  Thanks so much to Regit from making this possible. It's a good MB and this enhancement makes it even better.