Official GIGABYTE Forum

Network Card not identified on cold/ boot, Gives Yellow Alert in device manager

Hello,

I am using https://www.gigabyte.com/Motherboard/GA-Z77X-UP5-TH-rev-10 motherboard.

Everytime I cold/hard boot my computer (turn on electric power buttons then turn on PC)
My Network card gives error (yellow asterisk appears besides card).
I have to uninstall network card, then scan for hardware changes and the same appears properly..


Please help fix this issue.


Thanks.

shadowsports

  • 2245
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Greetings,
Verify the version of the driver you have installed now.

Visit this page and consider trying another version (earlier or later) than what you are using now.

https://www.intel.com/content/www/us/en/support/products/47620/ethernet-products/gigabit-ethernet-controllers-up-to-2-5gbe/intel-82579-gigabit-ethernet-controller/intel-82579lm-gigabit-ethernet-phy.html#support-product-specification

Once you have the driver, Right-click and remove the device, select the checkbox to remove the existing driver.  Restart, run the installer of the new driver you have downloaded.  See if this helps.
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW