Official GIGABYTE Forum

S/PDIF In and Out Cable

S/PDIF In and Out Cable
« on: August 23, 2010, 10:30:32 am »
Hi,
I have a GA-MA785GT-UD3H motherboard and I am looking to obtain the S/PDIF bracket mentioned in the manual - 12CR1-1SPINO-1*R. This is so I can connect my digital output speakers. Any ideas where I can purchase this is in the UK please? Thanks

absic

  • *
  • 5781
  • 523
  • Never give up; Never surrender!
    • Bandcamp
Re: S/PDIF In and Out Cable
« Reply #1 on: August 23, 2010, 10:42:48 am »
Hi there,

Had a quick look at the places I normally get these kind of bits from but can't locate it for you. I have sent a PM to the Forum moderator, on your behalf, and hopefully he will give you a heads up of where to get it from.
Remember, when all else fails a cup of tea and a good swear will often help! It won't solve the problem but it will make you feel better.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: S/PDIF In and Out Cable
« Reply #2 on: August 23, 2010, 10:51:17 am »
As absic has already said I expect runn3R will be able ot point you in the right direction. If not I can't see why any retailer that deals with Gigabyte couldn't order you one in.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

runn3R

  • *
  • 1328
  • 57
  • Admin
    • GIGABYTE UK
Re: S/PDIF In and Out Cable
« Reply #3 on: August 23, 2010, 05:11:02 pm »
Hi tgregory

We have following SPDIF In and Out bracket cable - S/N: 12CR1-1SPINO-11R,
as "*" mentioned in your description means all signs so the one above should be OK.

Moreover I have checked its pinout here and it suits the one in your MB.

To obtain it please write email to returns@gbt-tech.co.uk with the copy of this message.
ZX-S & C64 are still my favourites ;-)

runn3R

  • *
  • 1328
  • 57
  • Admin
    • GIGABYTE UK
Re: S/PDIF In and Out Cable
« Reply #4 on: September 06, 2010, 02:27:39 pm »
Have you received it finally?
As I was informed the cable has been dispatched more than 10 days ago to you.
ZX-S & C64 are still my favourites ;-)

GH1987

  • 1
  • 0
Re: S/PDIF In and Out Cable
« Reply #5 on: December 03, 2010, 09:03:54 pm »
Hello, I have an EP45-UD3L I want an S/PDIF input bracket S/N: 12CR1-1SPDIN-01R where can I find this in the UK?

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: S/PDIF In and Out Cable
« Reply #6 on: December 03, 2010, 09:22:51 pm »
Hi I would say the best thing is to contact "runn3R" above by PM and see if he can help by putting you in contact with someone.
I do notice that you are not in the UK though so that might be a problem.
« Last Edit: December 03, 2010, 09:23:55 pm by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Jamo

  • 2
  • 0
Re: S/PDIF In and Out Cable
« Reply #7 on: September 03, 2011, 03:55:10 pm »
I'm looking for the same but for GA8i945GMF. I assume they're the same if not similar.
Could someone please tell me where I could get one?
Thanks.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: S/PDIF In and Out Cable
« Reply #8 on: September 03, 2011, 06:48:46 pm »
Hi

The same suggestion would apply to you too. Try contacting your local Gigayte retailer but if you get no joy there try contacting by PM runn3R the forum Administrator and see if he can help you. He will probaly take a while to answer though as he is extremely busy having just returned from vacation.

http://forum.giga-byte.co.uk/index.php?action=profile;u=13
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Jamo

  • 2
  • 0
Re: S/PDIF In and Out Cable
« Reply #9 on: September 10, 2011, 12:28:44 pm »
Thank you Dark Mantis.

Much appreciate you reply.

Re: S/PDIF In and Out Cable
« Reply #10 on: November 24, 2011, 05:10:16 pm »
Hello !

I have MB M55PLUS-S3G and graphic card with SPDIF input connector (GeForce GTX 285). I'm looking for cable to connect them so I can use HDMI cable for video and audio signals. Can someone help me?

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: S/PDIF In and Out Cable
« Reply #11 on: November 24, 2011, 05:21:40 pm »
Hi

Doesn't your graphics card have a HDMI out connector port? If so you don't need anything else to hear the audio on films etc.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: S/PDIF In and Out Cable
« Reply #12 on: November 24, 2011, 05:32:01 pm »
Hi

Doesn't your graphics card have a HDMI out connector port? If so you don't need anything else to hear the audio on films etc.
Yes it have, but it dosn't recive audio signal thru PCI-Express slot. Card have seperate 2-pin audio-in connector..
Anyway I start to think that I should ask for help in GeForce forum as this problem actually is about graphic card not MB ;)

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: S/PDIF In and Out Cable
« Reply #13 on: November 24, 2011, 08:14:51 pm »
Yes it probably makes more sense to be fair. Good luck.  ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: S/PDIF In and Out Cable
« Reply #14 on: August 19, 2015, 09:25:25 pm »

Can I use this bracket 12CR1-1SPAUD-12 with my gigabyte motherboard model GA-F2A88X-D3H to get digital RCA (coaxial) out?
Motherboard has S/PDIF Out Header with only 2 pins.

Pin No.Definition
1.SPDIFO
2.GND

MBO manual link:
http://download.gigabyte.eu/FileList/Manual/mb_manual_ga-f2a88x-d3h_e.pdf

 

anything