Official GIGABYTE Forum

Rubber Mounting Kit for extra 90mm fan - Gigabyte X-Power CPU cooler GH-PSU11-PD

I have been looking for a rubber mounting kit to attach a second 90mm fan to my CPU cooler without any success.  

Are there other mounting brackets that would work with this cooler?  My CPU is running cold enough but I would like to overclock it hence the need for extra cooling.
« Last Edit: October 27, 2010, 09:14:37 am by etiennes »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Hi and welcome to the Gigabyte Forum.

 I am sure the Fan Mounting Rubber Pad kit is available as an extra as it is mentioned in the manual for adding an extra fan. If your supplier can't obtain one I would advise you to PM runn3R the Forum Admin and see if he can arrange something for you. The manual is shown here:

http://download.gigabyte.eu/FileList/Manual/cooler_manual_gh-psu11_en.pdf
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Thanks for the welcome  :) Yeah I read the manual and that's where I got the idea to fit a second fan.  I will contact runn3r to find out if he can help.

Cheers

I sent a PM to him as suggested but have not heard anything back yet.  Any other suggestions? I would buy a new cooler but since it's an old system I don't want to spend too much money on it.

I already have a 120mm intake fan blowing directly onto the cooler but I would like to overclock my Intel X6800 more but I can't get stable (Intel Burn Test 2) performance above 3.2 GHz.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
I am sure runn3R is finding out for you but he had a busy week last week with meetings etc so is probably a little behind. You could always PM him again just to make sure. ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Just to give an update:

I was given a contact e-mail for a Gigabyte support person.  Howver, in the end I didn't use it and decided to go for a new more efficient CPU cooler rather than spending money on adding a second fan to my current CPU cooler.  Not to knock Gigabyte or anything but I went for an Artic Cooling Freezer 7 Pro Rev.2 and am very happy with it thusfar.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Well as long as it all worked out alright in the end. ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Thanks Dark Mantis for your help, much appreciated  :)

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
You are very welcome and you know where we are now if you need any advice. ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy