Official GIGABYTE Forum

X58-UD7 - NO USB3 (USB2 WILL Work FM USB3 PORTS)

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: X58-UD7 - NO USB3 (USB2 WILL Work FM USB3 PORTS)
« Reply #30 on: January 02, 2011, 05:28:47 pm »
Did you disable the Keep DMI Data when you updated the BIOS?

Try clearing the CMOS completely by:


Remove the power cable from the mains supply and then press the power switch on the case for a few seconds just to drain any residual energy in the PSU capacitors.

Once done remove the motherboard battery for at least ten minutes before replacing it.
 
Next plug back into the mains supply and boot.
 
You will now need to enter the BIOS by pressing DEL and load Opimised BIOS Defaults.

Make any other changes to the BIOS settings to suit your self and then press F10 to save and exit.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

FLAMENKO

  • 22
  • 0
Re: X58-UD7 - NO USB3 (USB2 WILL Work FM USB3 PORTS)
« Reply #31 on: January 03, 2011, 02:01:15 am »
Yes...the only way to visually see the bios on boot is with the vid card in slot 1...  I cant get it to work on any other slot and the last pcie-8 slot doesnt work for any pcie device although it powers them

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: X58-UD7 - NO USB3 (USB2 WILL Work FM USB3 PORTS)
« Reply #32 on: January 03, 2011, 08:37:17 am »
Well that certainly sounds wrong if you are correct. I think it might be time to RMA the board then.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy