PC Boot Issue after flashing latest BIOS from memory stick. X58A UD3R Ver 2 (FE

[glushing]

Help Needed.
I flashed the board succesfully using a memory stick with the latest BIOS (FE) and now the pc will only boot with windows if the stick is connected. If I remove the stick the pc stics on the 'verifying DMI pool data' . An observation was that the BIOS screen did not have the option of dual bios update just the F8 option of Qflask bios update .  It seems that the PC is using the bios on the memory stick to boot, although there were no error messages during the update. Pleas advise if anyone else has experienced the issue
Setup: Win7 64 Bit, I7 950 , 12Gb DDR3, Raid 0

[Dark Mantis]

Hi and welcome to the Gigabyte forum.

My advice would be to reflash the BIOS using the laterst version available and done forget to disable the Keep DMI Data on the QFlash homescreen before continuing to run the update. Afterwards remove the USB drive and reboot into the BIOS to load Optimised BIOS Defaults after which change the primary boot order to HDD, make any other changes like disabling the floppy drive etc and save and exit

[glushing]

Ah Ah , this must be the forum wher to discuss issues !!

[jannie]

Hi Glushing amd welcome to the most friendliest forum on the web. yes lots of discussions and plenty of expertise and also , a few good laughs..welcome

[Dark Mantis]

Yes, you found it at last glushing

Welcome!