Official GIGABYTE Forum

Gigabyte Profile Settings

Gigabyte Profile Settings
« on: August 11, 2009, 03:57:38 pm »
Are there any sites where people post BIOS profiles for Gigabyte boards, for overclocking.

I have a EX58-UD4P with a D0 920 and 6Gb OCZ 1600Mhz ram and was looking for somewhere that has settings to overclock to.

Many thanks

Pottypete

  • 686
  • 15
Re: Gigabyte Profile Settings
« Reply #1 on: August 11, 2009, 05:21:22 pm »
Hi,
Don't blame me ifn it don woik

http://www.clunk.org.uk/forums/reviews/17292-gigabyte-ga-ex58-ud4p-living-review-7.html
Thanks to dunk, 8)
GIGABYTE GA-EX58-UD4P
MB Intelligent Tweaker(M.I.T.)
Advanced CPU Features {Press Enter]
CPU Clock Ratio*..............................:20
CPU Frequency .....(Ghz)...................:3,840Mhz (4,032Mhz Turbo)
Intel(R) Turbo Boost Tech..................:Enabled
CPU Cores Enabled............................:ALL
CPU Multi Threading..........................:Enabled
CPU Enhanced Halt (C1E)...................:Enabled
C3/C6/C7 State Support....................:Disabled
CPU Thermal Monitor.........................:Enabled
CPU EIST Function............................:Enabled
Virtualization Technology...................:Enabled
Bi-Directional PROCHOT.....................:Enabled
Uncore & QPI Features [Press Enter]
QPI Link Speed*..............................:x36
QPI Link Speed* .............(Ghz)....... :7.59
Uncore Frequency...........................:x16
Uncore Frequency..............(Mhz).... :3,072
Isochronous Support.......................:Enabled
Advanced Clock Control [Press Enter]
>>>>>Standard Clock Control
Base Clock (BCLK) Control*..............:Enabled
BCLK Frequency (Mhz)*...................:192
PCI Exxpress Frequency (Mhz)...........:103
C.I.A.2..........................................:Disabled
>>>>>Standard Clock Control
CPU Clock Drive (mV).......................:700mV
PCI  Express Clock Drive (mV)............:700mV
CPU Clock Skew (ps)........................:0ps
IOH Clock Skew (ps)........................:0ps
Advanced Dram Features [Press Enter}
Performance Enhance......................:Turbo
Extreme Memory Profile (X.M.P.)........:Profile1
System Memory Multiplier (SPD)........:x8
Memory Frequency (Mhz).................:1,536Mhz
DRAM Timing Selectable (sPD) ..........:Quick
Channel A Timing Settings [Press Enter]
>>>>>Channel A Standard Timing Control
Cas Latency Time...........................:8
tRCD............................................:8
tRP..............................................:8
tRAS............................................:21
>>>>>Channel A Advanced Timing Control
tRC..............................................:30
tRRD ...........................................:6
tWTR ..........................................:6
tWR.............................................:10
tWTP............................................:Auto (22)
tWL..............................................:Auto (8)
tRFC............................................:60
tRTP............................................:6
tFAW...........................................: Auto (30)
Command Rate (CMD) .....................:1
>>>>>Channel A Misc Timing Control
Round Trip Latency.........................: Auto (50)
Channel A Turnaround Setting [Press Enter]
>>>>> Channel A Writes Followed By Reads
Different DIMMs.............................:7Auto
Different Ranks..............................:7 Auto
On The Same Rank.........................:9 Auto
>>>>> Channel A Reads Followed By Writes
Different DIMMs.............................:8 Auto
Different Ranks .............................:8 Auto
On The Same Rank.........................:8 Auto
>>>>> Channel A Reads Followed By Reads
Different DIMMs.............................:6 Auto
Different Ranks..............................:5 Auto
On The Same Rank.........................:1
>>>>> Channel A Writes Followed By Writes
Different DIMMs.............................:6 Auto
Different Ranks..............................:6 Auto
On The Same Rank.........................:1
Channel B Timing Settings [Press Enter]
>>>>>Channel B Standard Timing Control
Cas Latency Time..........................:8
tRCD...........................................:8
tRP.............................................:8
tRAS...........................................:21
>>>>>Channel B Advanced Timing Control
tRC.............................................:30
tRRD...........................................: 6
tWTR..........................................: 6
tWR............................................:10
tWTP............................................:Auto (22)
tWL..............................................:Auto (8)
tRFC...........................................:60
tRTP...........................................:6
tFAW..........................................:Auto (30)
Command Rate (CMD)....................:1
>>>>>Channel B Misc Timing Control
Round Trip Latency........................: Auto (56)
Channel B Turnaround Setting [Press Enter]
>>>>> Channel B Writes Followed By Reads
Different DIMMs............................:7 Auto
Different Ranks.............................:7 Auto
On The Same Rank........................:9 Auto
>>>>> Channel B Reads Followed By Writes
Different DIMMs............................:8 Auto
Different Ranks.............................:8 Auto
On The Same Rank........................:8 Auto
>>>>> Channel B Reads Followed By Reads
Different DIMMs............................:6 Auto
Different Ranks.............................:5 Auto
On The Same Rank........................:1 Auto
>>>>> Channel B Writes Followed By Writes
Different DIMMs............................:6 Auto
Different Ranks.............................:6 Auto
On The Same Rank........................:1 Auto
Channel C Timing Settings [Press Enter]
>>>>>Channel C Standard Timing Control
Cas Latency Time.........................:8
tRCD..........................................:8
tRP............................................:7
tRAS..........................................:21
>>>>>Channel C Advanced Timing Control
tRC............................................:30
tRRD..........................................:6
tWTR.........................................:6
tWR...........................................:10
tWTP............................................:Auto (22)
tWL..............................................:Auto (8)
tRFC..........................................:60
tRTP..........................................:6
tFAW.........................................:Auto (30)
Command Rate (CMD)...................: 1
>>>>>Channel C Misc Timing Control
Round Trip Latency.......................:57 - Auto
Channel C Turnaround Setting [Press Enter]
>>>>> Channel C Writes Followed By Reads
Different DIMMs..........................:7 Auto
Different Ranks...........................:7 Auto
On The Same Rank......................:9 Auto
>>>>> Channel C Reads Followed By Writes
Different DIMMs..........................:8  Auto
Different Ranks...........................:8 Auto
On The Same Rank......................:8 Auto
>>>>> Channel C Reads Followed By Reads
Different DIMMs..........................:6 Auto
Different Ranks...........................:5 Auto
On The Same Rank......................:1
>>>>> Channel C Writes Followed By Writes
Different DIMMs..........................:6 Auto
Different Ranks...........................:6 Auto
On The Same Rank......................:1
Advanced Voltage Control [Press Enter]
>>>>CPU Voltages
LoadLine Calibration.....................:Disabled
CPU Vcore.................................:1.29375v
QPI/VTT Voltage.........................:1.22v
CPU PLL.....................................:1.800v
>>>>>MCH/ICH Voltrage
PCIE.........................................:1.500v
QPI PLL.....................................:1.100v
IOH Core...................................:1.110v
ICH I/O.....................................:1.500v
ICH Core...................................:1.100v
>>>>>Dram
DRAM Voltage............................:1.600v
DRAM Termination.......................:0.760v
Ch-A Data Vref...........................:0.740v
Ch-B Data Vref...........................:0.740v
Ch-C Data VRef..........................:0.740v
Ch-A Address Vref......................:0.740v
Ch-B Address Vref.......................:0.740v
Ch-C Address VRef..................

I don no nuffink

Re: Gigabyte Profile Settings
« Reply #2 on: August 11, 2009, 05:52:42 pm »
Thanks, I'll give these a try.

In the mean time I have it overclocked to 3.6 with turbo off and it's stable but running at 68c at full load. What is the rule of thimb when it comes to the temperature and overclocking? In Real Temp my Distance to TJ Max is between 15 and 20 which seems low to me.

Should I try for 3.8 or am I at the limit with 3.6?

 

anything