GA-P67A-UD4 - OCZ RevoDrive not working

[razthehunter]

Thanks Pierre,
first when i clicked on your link I did not see the correct bios version because it was the wrong motherboard (ud5 instead of ud4). Bot on that site is also the correct bios for my mobo. here is the link  for others with the same problem:

http://www.station-drivers.com/page/gigabyte/ga-p67a-ud4.htm

Many thanks,
Andrew

[Dark Mantis]

If it is any help to you the F7e version is available from the TweakTown forum.

http://forums.tweaktown.com/gigabyte/28441-gigabyte-latest-bios.html

[Deez]

I have the same board running Intel I5 processor but I'm not using any Revo drives... soon as i run any PCI device with the Graphics card i get the boot loop... kinda desperate for answers as i need to get the machine to site in the morning... tried the update you guys listed but no love... any other ideas?

[Dark Mantis]

What other components are you running and what PSU is powering them ?

[Deez]

Well the lay out runs as follows, I5 processor 4GB RAM G-Force N430 graphics (we specialize in CCTV products) 2 X 16ch PCI capture cards and 2.25 TB

All this is driven by a 720watt Gigabyte Oden PSU...

Taking the PC to the supplier for answers now... Would still love to see your reply tho   

[Dark Mantis]

To be honest I don't know that much about CCTV or the cards and so don't understand what sort of power they use or resources. This makes it hard to determine what could be wrong.

[Deez]

eventually got sorted.... Problem was incompatible PCI versions... Nice... on to the next problem

[Dark Mantis]

Thanks for giving us the update. It is always nice to know how things were sorted out in the end.

[ilk]

Thanks Pierre,
first when i clicked on your link I did not see the correct bios version because it was the wrong motherboard (ud5 instead of ud4). Bot on that site is also the correct bios for my mobo. here is the link  for others with the same problem:

http://www.station-drivers.com/page/gigabyte/ga-p67a-ud4.htm

Many thanks,
Andrew

Guys, every time i try to upgrade i get invalid bios image! and this includes the above version...

[Dark Mantis]

Hi and welcome to the Gigabyte Forum.

You must download the @BIOS program form the website and use that to run the BIOS update for the first time. Once completed you should be able to go back to using QFlash as per normal. The reason for this is the original BIOS and utility were buggy.