Official GIGABYTE Forum

GA-MA770-UD3 and LSI 9240-8i / IBM M1015 controller

apatch

  • 9
  • 0
Re: GA-MA770-UD3 and LSI 9240-8i / IBM M1015 controller
« Reply #15 on: May 30, 2011, 07:02:22 am »
Thank You I did it and this my last hope.

Regards apatch
GA-MA790FXT-UD5P (Rev. 1.0) F8M , AMD Phenom II X6 1090T @4100 TurboCore, Scythe Mugen, BeQuiet BQT-EQ-700W, KHX1600C9AD3B1K2/4G, ASUS HD6850 DirectCU, SB X-Fi Xtreme Music, Vertex 2 SSD 55GB, Vertex SSD 250GB, Vertex SSD 30GB, 2xRaid0 2TB, WD 2TB+1,5TB, APC SUPS 1000VA,, HP LP2475W 24, LSI 9240-8i

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-MA770-UD3 and LSI 9240-8i / IBM M1015 controller
« Reply #16 on: May 30, 2011, 02:20:02 pm »
Well please let us know the outcome which hopefully will be positive. ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

apatch

  • 9
  • 0
Re: GA-MA770-UD3 and LSI 9240-8i / IBM M1015 controller
« Reply #17 on: June 18, 2011, 01:09:23 pm »
I was asked to test some old bios F7 which is impossible for me to do, due to lack of my 1090t processor support.  My problem was sent to laboratory and I was asked for waiting for diagnose this problem there. Month for eventual new bios release, time will tell.
GA-MA790FXT-UD5P (Rev. 1.0) F8M , AMD Phenom II X6 1090T @4100 TurboCore, Scythe Mugen, BeQuiet BQT-EQ-700W, KHX1600C9AD3B1K2/4G, ASUS HD6850 DirectCU, SB X-Fi Xtreme Music, Vertex 2 SSD 55GB, Vertex SSD 250GB, Vertex SSD 30GB, 2xRaid0 2TB, WD 2TB+1,5TB, APC SUPS 1000VA,, HP LP2475W 24, LSI 9240-8i

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-MA770-UD3 and LSI 9240-8i / IBM M1015 controller
« Reply #18 on: June 18, 2011, 02:48:02 pm »
All these things seem to take forever especially when it is your machine and are waiting to get it back to full use again. Hopefully coming to the end now though. ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

apatch

  • 9
  • 0
Re: GA-MA770-UD3 and LSI 9240-8i / IBM M1015 controller
« Reply #19 on: October 26, 2011, 05:34:53 pm »
Problem was not solved , tried new GA F8N bios and latest LSI 20.10.1-0061 firmware (Oct 14, 2011) without any luck. In the meantime some advanced user tried to help me writing some special boot code interrupt interceptor but I admit we failed with it (I especially with my patience and broken-neck testing procedures ;)  ).

Also I was trying LSI card with new GA Intel i3 board and all worked ok.

So to sum it up, in the future I will replace this board with probably some new intel chipset (of course without NF200 bridge which causes similar problems) and almost certainly say goodbye to Gigabyte.

bye :)
GA-MA790FXT-UD5P (Rev. 1.0) F8M , AMD Phenom II X6 1090T @4100 TurboCore, Scythe Mugen, BeQuiet BQT-EQ-700W, KHX1600C9AD3B1K2/4G, ASUS HD6850 DirectCU, SB X-Fi Xtreme Music, Vertex 2 SSD 55GB, Vertex SSD 250GB, Vertex SSD 30GB, 2xRaid0 2TB, WD 2TB+1,5TB, APC SUPS 1000VA,, HP LP2475W 24, LSI 9240-8i

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-MA770-UD3 and LSI 9240-8i / IBM M1015 controller
« Reply #20 on: October 26, 2011, 06:10:32 pm »
Well I am sorry that we didn't manage to get to the bottom of your problem but sometimes this is just the way it goes. I hate to be beateb but I can't think of anything else I'm afraid. :-\
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

 

anything