Official GIGABYTE Forum

Weird GA-P67A-UD7-B3 USB problem

Weird GA-P67A-UD7-B3 USB problem
« on: May 09, 2011, 02:23:07 pm »
Hello to all! I have encountered a weird problem with my computer today! Actually i never knew that there was this kind of error in windows! Windows keep notifying me that there is a power surge on hub port (the USB 3.0 one that is controlled from the Renesas chip) and at this very moment i am writing this post the balloon keeps popping up!

I have restarted the computer several times but the problem persists! The weirdest thing though is that i have no device connected to the USB 3.0 ports! The only thing that's connected on a usb port is the mouse and it is connected on the USB 2.0 ports at the back panel of the motherboard! Anyway i use the reset option on the window that pops up but after a while there's a new warning regarding the same problem!

I'm using F3 BIOS and everything is working at stock speeds, no overclock or other stuff! On the following picture you can see the power surge problem.




My system's specifications are the following:

Motherboard: GA-P67A-UD7-B3 (F3 BIOS)
CPU: Intel i7 2600k
RAM: Corsair Vengeance 2x 4 gb @ 1600 MHz 8-8-8-24
CPU Cooler: Zalman CNPS 9900 MAX
GPU: Gainward GTX570 Golden Sample
HDD: Western Digital Caviar Black 500 gb SATA 3 (WD5002AALX-00J37A0) for windows and programs
         Western Digital Caviar Green 1.5 Tb SATA 2 (WD15EADS-00P8B0) for storage
Optical Drives: NEC Optiarc DVD-RW AD-7261S

I hope this isn't a motherboard problem coz i'm gonna kill myself! :'(

Thank you for your help in advance!

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #1 on: May 09, 2011, 03:30:31 pm »
Hi and welcome to the Gigabyte Forum.

I would suggest checking the USB3.0 connector blocks on the motherboard for any shorting pins etc. They will be at the bottom of the mobo. The same in the USB3.0 ports on the rear of the I/O plate. Make sure there is no foreign body in them whioch could cause a short.

Apart from that it would sound like a motherboard failure. You could of course just disable in the BIOS the USB3.0 ports if you don't intend to use them.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #2 on: May 09, 2011, 03:43:37 pm »
Thank you for your reply Dark Mantis!

I've checked the backplate and it seems there's nothing wrong. I will check the pins on the motherboard later.

I don't plan to use the USB 3.0 ports but c'mon i bought this motherboard just a month ago (12/04) and it starts falling apart? I mean when you buy something new you want everything to work like charm otherwise why buying it in the first place?

Anyway do you think it might be a drivers problem? Because last night i've installed some audio/video codecs and i thought there was some kind of conflict.

Should i RMA the board?

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #3 on: May 09, 2011, 05:03:39 pm »
I totally agree with you regarding the purchase. You expect to get a perfect item when you buy it new. It was just a suggestion.

Could well be a driver or BIOS issue. In fact I would think that is more likely than a faulty board. You could try going back to a restore point before the new codecs were installed and see if the problem is still there.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #4 on: May 09, 2011, 06:41:48 pm »
I've checked the pins on the motherboard and i didn't find any issue!  I used a can of compressed air to clean the ports on the back panel and the pins on the motherboard! I've also uninstalled and reinstalled the Renesas drivers but the problem is still there! I will format and get a fresh Windows 7 installation as soon as my new HDD arrives.

I dropped by the reseller where i purchased the mobo and had a little chit chat about the problem. He told me that if the mobo is faulty we can RMA it but i must be sure that's faulty! I don't know if this is a Gigabyte policy here in Italy or the reseller is lousy but if there's a problem shouldn't Gigabyte replace the faulty hardware right away?

F5BJR

  • 478
  • 31
Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #5 on: May 09, 2011, 06:55:49 pm »
*
You have Renesas last firmware & drivers to this link

http://www.station-drivers.com/page/nec.htm

Pierre
GA-X58A-UD5 I7 930
6x2Go KINGSTON 9905403-084
ENERMAX Modu 82+
Sharkoon REBEL12
2*HD5770SingleSlot+PCI-HD4350
2xSENSY 26'
2xBOX 5HD HotPlug
3xBOX 34HD MaxinPower
2x AD4SR5HPMU Addonics 8x1ToWDGreen 
4x 1TO RAID10 ICH10+1 BACKUP OS
2 * RR622 HighPoint
Sata 88SX7042  
AverMedia H727

Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #6 on: May 10, 2011, 11:52:11 am »
I'm having the same problem except mine only started once I installed the Renesas drivers. For the month or so that I was using the generic win7 drivers I didn't have the problem.

It's also strange that if I disable then re-enable the hub the error message doesn't reappear.

Motherboard: GA-P67A-UD7-B3 (F3 BIOS)
CPU: Intel i7 2600k
RAM: G.Skill Ripjaws-X 2x 4 gb @ 1600 MHz 9-9-9-24
CPU Cooler: Nocuta NH-D14
GPU: Gigabyte GV-N460OC-1GI
HDD: OCZ 120G Vertex II SSD 3.5 for windows
         Western Digital 2TB Green 64MB SATAII WD20EARS for storage
Optical Drives: Pioneer SATA DVR219L 24X DVD

Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #7 on: May 10, 2011, 09:22:09 pm »
I just had a fresh Windows 7 Ultimate 64 installation installed the newest Renesas USB drivers and everything until now is ok! No power surge errors, no usb3 problems everything works like a charm! I hope it lasts! Thank you all for your replies and your help!

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #8 on: May 10, 2011, 09:42:34 pm »
You are welcome and we will keep our fingers crossed that everything stays that way. ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Oubadah

  • 51
  • 0
Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #9 on: June 19, 2011, 02:43:40 am »
Just built a new machine, and had this issue after just 2 days. Balloon kept popping up over and over again with that stupid power surge message, and 'Unknown USD Device' even when I unplugged my only USB device (mouse).

Motherboard: GA-P67A-UD7-B3 (F4 BIOS)
CPU: Intel i7 2600k
RAM: G.Skill Ripjaws-X 2x 4 gb @ 1600 MHz 8-8-8-24
CPU Cooler: Nocuta NH-D14
GPU: EVGA GTX 580
HDD: Intel SSD 320 80GB for windows
         Intel SSD 320 120GB for programs

I updated to the latest Renesas controller firmware and drivers, but that didn't help. Finally I did a CMOS reset, and that fixed the issue for now.

I'm going to disable the renasas controllers in the BIOS. I don't want to have to do CMOS resets regularly. Great problem to be having with the flagship board...

« Last Edit: June 19, 2011, 02:54:12 am by Oubadah »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #10 on: June 19, 2011, 10:04:57 am »
Hi

When updating the Renesas drivers make sure that you uninstal the original ones first. This will help stop problems associated with this.

Keep an eye open for a new BIOS as that will probably address this issue.

Don't forget that although you haven't got any USB devices apart from your mouse attached you probably still have hubs built into other components.
« Last Edit: June 19, 2011, 03:30:56 pm by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Oubadah

  • 51
  • 0
Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #11 on: June 19, 2011, 11:29:20 am »
Don't forget that although you haven't got any USB devices apart from your mouse attached you probably still have hubs built into other components.

I don't think there are any more hubs in my system. The only components are GTX 580, Titanium HD, RAM and Intel 320 SSDs... The only hubs are the two VLI VL810 on the damned UD7. I hope they release the BIOS fix sooner rather than later.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #12 on: June 19, 2011, 12:43:01 pm »
You can of course try asking GGTS for help directly.

Just enter your email address and click on the language of choice.
GGTS   http://ggts.gigabyte.com/

Please expect several days for a reply.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

F5BJR

  • 478
  • 31
Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #13 on: June 19, 2011, 02:33:17 pm »
*
--> last firmware for Renesas

firmware Version 3.0.2.8.0.8

http://www.station-drivers.com/page/nec.htm

Pierre

GA-X58A-UD5 I7 930
6x2Go KINGSTON 9905403-084
ENERMAX Modu 82+
Sharkoon REBEL12
2*HD5770SingleSlot+PCI-HD4350
2xSENSY 26'
2xBOX 5HD HotPlug
3xBOX 34HD MaxinPower
2x AD4SR5HPMU Addonics 8x1ToWDGreen 
4x 1TO RAID10 ICH10+1 BACKUP OS
2 * RR622 HighPoint
Sata 88SX7042  
AverMedia H727

Oubadah

  • 51
  • 0
Re: Weird GA-P67A-UD7-B3 USB problem
« Reply #14 on: June 20, 2011, 11:58:06 am »
*
--> last firmware for Renesas

firmware Version 3.0.2.8.0.8

http://www.station-drivers.com/page/nec.htm

Pierre



Yeah, that's the one I installed.

Note that the UD7 has two Renesas D720200 controllers and the updater will give an error about plural devices. You have do disable controller one in the BIOS to flash the other (do them one at a time).