Official GIGABYTE Forum

GB Z68X UD3P Cold Boot?

zujko

  • 18
  • 0
GB Z68X UD3P Cold Boot?
« on: June 03, 2011, 10:01:03 pm »
Hi guys, i have, i think a little problem, i pressed the button(hard reset on case, it's the only way to see the cold boot) to reset the computer,when they show the speed of processors on POST, the computer restarts, and then went into windows, i have win7 x64..I have(1st release) latest bios F4..
My spec:
i5 2600k, default..
kingmax ddr3 1333MHz 6GB
Corsair AX 750
gtx560ti Gigabyte
SSD Vertex3
Hdd Samsung F1 1.5Tb

This component are new..(2 montsh max.)

Probable cause is?
Or we should wait for newer release bios..
Sry for bad english
i7 2600k/Asus P8Z68 V PRO/GB 560GTX Ti/AX 750W/SSD Samsung 470/HDD 1.5TB/DDR3 8GB GSkill 1600Mhz/CM690 II

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GB Z68X UD3P Cold Boot?
« Reply #1 on: June 04, 2011, 08:06:14 pm »
Hi

Maybe I am just being dense here but I don't see any problem listed. :-\ Can you make it all a bit clearer please and then I will try and help you.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

zujko

  • 18
  • 0
Re: GB Z68X UD3P Cold Boot?
« Reply #2 on: June 05, 2011, 05:14:13 pm »
Ok, I'll try to explain.. ;D
http://www.youtube.com/watch?v=pHyvoDMd0GE
View the video clip.
Tnx
i7 2600k/Asus P8Z68 V PRO/GB 560GTX Ti/AX 750W/SSD Samsung 470/HDD 1.5TB/DDR3 8GB GSkill 1600Mhz/CM690 II

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GB Z68X UD3P Cold Boot?
« Reply #3 on: June 05, 2011, 05:46:11 pm »
Hi

You are getting multiple boots. Have you overclocked the system at all ?

If not try doing an extended CMOS clear by following these instructions:

Remove the power cable from the mains supply and then press the power switch on the case for a few seconds just to drain any residual energy in the PSU capacitors.

Once done remove the motherboard battery for at least one hour before replacing it.
 
Next plug back into the mains supply and boot.
 
You will now need to enter the BIOS by pressing DEL and load Optimised BIOS Defaults.

Make any other changes to the BIOS settings to suit your self like disabling the floppy drive, disabling the full screen logo and making the HDD the primary boot device and then press F10 to save and exit.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

zujko

  • 18
  • 0
Re: GB Z68X UD3P Cold Boot?
« Reply #4 on: June 05, 2011, 05:49:51 pm »
The system is not OC, running on default..Ok i l try this..
i7 2600k/Asus P8Z68 V PRO/GB 560GTX Ti/AX 750W/SSD Samsung 470/HDD 1.5TB/DDR3 8GB GSkill 1600Mhz/CM690 II

zujko

  • 18
  • 0
Re: GB Z68X UD3P Cold Boot?
« Reply #5 on: June 05, 2011, 07:10:49 pm »
wow..man, you are great..thanks man for this...now is ok..

I'm interested in just who was the cause?

Is there a chance that happening again?
i7 2600k/Asus P8Z68 V PRO/GB 560GTX Ti/AX 750W/SSD Samsung 470/HDD 1.5TB/DDR3 8GB GSkill 1600Mhz/CM690 II

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GB Z68X UD3P Cold Boot?
« Reply #6 on: June 05, 2011, 09:25:18 pm »
The CMOS gets corrupted, sometimes by something as simple as using the Reset button. So yes it is possible that it could occur again. It might help to synchronise your Main and Backup BIOSes.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy