Official GIGABYTE Forum

Sata III for my old GA-EP45-UD3R ???

Sabot

  • 1
  • 0
Sata III for my old GA-EP45-UD3R ???
« on: June 24, 2011, 02:13:42 am »
Any idea what kind of speed I could get from a SATA III Raid Card which is plugged into my PCI-Express? Since this MB has trooped along, I would like to get the best speed possible without trashing a reliable MB like this one.

Motherboard: GA-EP45-UD3R/UD3

The SSD I am looking at is:

Crucial M4 2.5 inch 64GB SATA3 (x2 Raid 0)
or a single
Crucial M4 2.5 inch 128GB SATA3

Raid Card:
HighPoint Rocket 620-OEM PCI-Express 2.0 SATA III (6.0Gb/s)

Side Question.... Should I go with 2 64GB's in Raid or a single. Can I run a single SSD on the Raid Card?
« Last Edit: June 24, 2011, 02:14:32 am by Sabot »

Aussie Allan

  • 1964
  • 141
  • A yoyo uses all three fundermental laws of phisics
Re: Sata III for my old GA-EP45-UD3R ???
« Reply #1 on: June 24, 2011, 07:57:56 am »


 Yes,Yes, Yes and let me think!................Yes..... as long as you have at least 4X PCI-E slot available, any of the kit you stated will run at or near the spec speeds, and yes you can boot of this SATA III spec raid card...........the hard thing to do IS NOT boot off it.....believe me!...

   as this card has two raid controllers, best bang for buck is achieved with 2 not 4 drives hanging off it.....one for each controller

 Aussie Allan
i7-4790K @4.8GHz 24/7 water clock
MSI XPower AC
32GB corsair  2666Mhz
 GTX-1070Ti full cover
Lange DDC elite pump
G changer360 Rad x2
Phobya 450 balancer
W10 Pro-64
Zigor 2000 UPS
1x500GB for clone
6x2tb- raid5-Storage
C: Evo 970 Pro 512gb
Scratch:Evo 970 Plus 512gb