Vcore adjustment missing from BIOS (P67A-D3-B3)

[snadge]

I have been advised to adjust the voltage on my overclocked 2500K - thing is the Vcore adjustment is not there in BIOS VOLTAGES

here is whats on it (COPIED FROM MANUAL)
>>>CPU
TYPE ------- NORMAL SETTING ----- CURRENT
LOAD LINE CALIBRATION -- --[AUTO]
DVID -- +0.00V -- [AUTO]
QPI/VTT -- 1.050V -- [AUTO]
SYSTEM AGENT VOLTAGE -- 0.950 -- [AUTO]

>>>MCH/ICH
PCH CORE -- 1.050V -- [AUTO]
CPU PLL -- 1.800V -- [AUTO]

>>>DRAM
DRAM VOLTAGE [AUTO]
DRAM VREF [AUTO]
DRAM TERMINATION [AUTO]
CHA DATA VREF [AUTO]
CHB DATA VREF [AUTO]
CHA ADDRESS [AUTO]
CHB ADDRESS [AUTO]

[ex58]

Here is how look in the BIOS:



Btw,
you can use also EasyTune 6.

[snadge]

nope its not on this board and a few other gigabyte boards.. ive seen 4 or 5 posts already, that Vcore option is not there

[ex58]

Can you show pic with EasyTune6.
Should be like this:

[snadge]

here you go... no Vcore setting - the ALT+F1 'advanced option' is a myth too

[ex58]

No pic?
"403 - Forbidden"

[snadge]

look again

[ex58]

Hmm,strange.....
Btw,
give more detail ,read from CPU-Z.
Core speed....
Core voltage....
Multiplier.....
Bus speed...

Edit:
reading your Manual and google your board,seem that you can overclock only thru ET6/Quick Boost.
To increase Vcore use ET6 and DVID +0.01,+0.02....etc

[snadge]

Hmm,strange.....
Btw,
give more detail ,read from CPU-Z.
Core speed....
Core voltage....
Multiplier.....
Bus speed...

Edit:
reading your Manual and google your board,seem that you can overclock only thru ET6/Quick Boost.
To increase Vcore use ET6 and DVID +0.01,+0.02....etc

I can overclock in BIOS with Multiplier and the BIOS automatically sets voltage.. for 4.4Ghz it sets at 1.284 and seems stable although only run prime for max of 20 mins - does this voltage look ok>? if so then great...